WARNING: Before enabling PoE passthrough in the UniFi Network Application, ensure that the connected PoE device supports the PoE power (48V). The only downside is that this thing is fanless, and like many fanless network appliances it feels hot to me. I set up a small fan to blow air onto the wall where I mounted it all, which maybe isn’t necessary but certainly made me feel more comfortable :)

Supports 802.3af/at or 48V Passive PoE to power the switch and can provide 48V (2-pair) PoE passthrough to port 8. Note: Other vendors may refer to PoE, PoE+, and PoE++ as 802.3af, 802.3at, and 802.3bt, respectively. Note: Please refer to model-specific datasheets found on the UI Store for more detailed information. PoE Availability and Power Requirements pair) PoE output is Off by default. Enabling PoE output (via the UniFi Network Application) requires 24W input power via PoE In or DC input.This US-8 also has a pass-thru PoE (output) port on #8. Port 8 has PoE output turned OFF by default. WARNING: When both PoE In and DC Input are connected, the highest voltage power of the two will immediately pass through to PoE Out (if enabled). The included Mounting Accessories support any orientation wall-mount and desk/shelf mounting. Cloud Controller The US-8-60W is an 8-port gigabit switch with four 802.3af PoE ports. Its auto-sensing PoE ports deliver up to 15.4W of power per port. I bought this primarily to allow me to setup UniFi WiFi WAP at a small office location. It works great to unify multiple wired networks via VLAN into a trunk that their wireless access points (WAP) can use.

The UbiquitiUniFi US-8-60Wis an 8 port PoE gigabit switch with four RJ45/802.3af PoE ports and four RJ45 ports. The US-8-60W auto-sensing PoE ports deliver up to 15.4W of power per port all in a compact form factor. Alike the other UniFi Switches, the US-8-60W is fully manageable, delivering robust performance for your network. The Ubiquiti UniFi US-8is a non-PoE 8 port gigabit switch, which supports PoE passthrough. It is perfect for cleanly adding Ethernet ports where needed, all in a compact form factor.Alike the other UniFi Switches, the US-8is fully manageable, delivering robust performance for your network. PoE Availability is a switch's total power, in Watts, that it can distribute among all connected clients. Your PoE Availability must be greater than the sum of all device power requirements to prevent instability or failure.The US-8 is a PoE Powered 8-port gigabit switch with PoE Passthrough. Perfect for cleanly adding Ethernet ports where needed, with passthrough to keep your PoE device powered.