In the event of spillage, clean up using clean receptacles and dispose of carefully. Do not add water to spilled materials. Do not use floor sweeping compounds to clean up spills. Sweep and scoop spilled material into clean, dedicated equipment. Because pH measures how acidic or alkaline your water is, it is important to make sure your hot tub ph Levels are always balanced between 7.2 and 7.6 to avoid impacting your Lay-Z-Spa and your spa experience. Outdoor storage areas for your hot tub chemicals should be situated away from anything flammable. Keep any petrol-powered equipment, like your lawnmower, in a different location. The storage area should also be away from sources of heat, like an outdoor fire pit or BBQ. ClearWater® is our chosen and recommended chemical provider. Developed with Lay-Z-Spa in mind, the range of ClearWater® hot tub chemicals includes everything needed to make sure your Lay-Z-Spa's water stays safe, clean and clear. Explore the table below which includes each product’s use and function.

Dip a ClearWater® Test Strip in the centre of your Lay-Z-Spa, remove and hold it still for 15 seconds. Make sure that any outdoor storage of chemicals is as far away from your hot tub as possible and in a dry, covered area. Humidity or even small amounts of water can cause chemical reactions that could lead to dangerous fumes.Clearwater pH Minus , also known as ‘pH reducer’ is the most simple and effective way to decrease the pH of your spa water when it has surpassed the recommended level. pH minus can also be used to lower TA (Total Alkalinity) levels.

There are other hot tubs in the range of the same size that include flashier features, though this will be reflected in the price, and often these features are more for show than anything.If you are going away we would suggest emptying the hot tub and cleaning it so the water is not left to go stagnant. Do not re-fill until you return from your trip. Chlorine demand of water too high at start up, after holidays or due to excess contamination or neglect Dip a ClearWater® Test Strip in the centre of your Lay‑Z‑Spa, remove and hold it still for 15 seconds. If you’re looking for a stylish, designed, premium quality spa that works just as well in the winter as it does in the summer, the Lay Z Spa Rio is a decent choice and should provide you with years of quality and enjoyment.

Never mix different chemicals in concentrated forms. This includes the kit products but also with other products like bleach or weedkillers – a dangerous reaction may occur. Do not eat, drink or smoke when using this product. Have a First Aid Kit available for any accidents Clearwater Clarifier contains flocculants which bind small particles of debris and algae together so that your Lay-Z-Spa filtration system can adequately remove them, resulting in clean and sparkly water. This is a very effective way of preventing your spa water from looking dull and cloudy, due to the build-up of dead algae and debris that is too small to be trapped by your filter. Even if you have treated your spa for algae using Clearwater Algaecide, it is recommended that you use the Water Clarifier to remove any residual debris. The amount of pH increaser or decreaser you need to add to your hot tub depends on the volume of water and how low your readings are. Refer to the dosage information will be printed on the individual chemical bottles. Clearwater Foam Remover is designed to control and prevent foaming in your hot tub, which is typically caused by the reaction of water with shampoos, deodorants and natural body oils present on the user.Inflatable hot tubs can be expensive to run, but this all depends on how often you intend to use your tub and which model you opt for. For example, newer models have high-tech energy-saving systems which maintain the temperature for longer. For low pH levels below 7.2 you will need to use pH Plus to help raise the pH levels and balance the water.

Clearwater pH Plus , also known as ‘pH increaser’ is the best way to increase pH levels that have dropped below the recommended level. To avoid skin discomforts and enable the chlorine in your spa to work effectively, it’s vital that acidity is monitored and controlled. The recommended pH balance of spa water is between 7.2 and 7.6. Additionally, all our hot tubs come with an inflatable lid and DuraPlus™ cover creating extra insulation to keep the heat in your Lay‑Z‑Spa. Always pre-dissolve chemicals in a clean, plastic container in a well-ventilated area. When pre-dissolving chemicals always add chemicals to water and not vice versa. Always add the chemicals to the water. When the start of Covid/Corona virus started to become apparent that we could be facing a long time in "shut down" we started to make plans about what we might want to get us through the next few months. In came some bikes as part of the social distancing measures, along with a PS4 for me. My other half for months had badgered me that we should get a hot tub for home. I made the excuse that I didn't want to get one whilst we lived in rented home as it would be difficult to move. That was until we saw the Lay-Z-Spa Rio Hot Tub at a local super market. It is important to get your hot tub Chlorine levels correct. Not enough Chlorine can result in unhygienic bathing conditions, whereas high Chlorine levels can cause irritated eyes or skin.For low TA levels below 80ppm you will need to use Total Alkalinity Increaser. The amount of TA + you need to add to your hot tub depends on the volume of water and how low your readings are. As a guide - a hot tub of 1,000 litres requires 18g to raise Total Alkalinity levels by 10ppm (parts per million). Lay‑Z‑Spa hot tubs use significantly less energy to maintain the temperature when massage and heating are off. Drain hot tub to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chlorine.