We supply a large range of wire coils, all galvanised to prevent the steel from rusting. Line wire can also be used to form fencing without any mesh and also can be used for plant support in gardens and allotments.

In warmer climates, many rolled wire mesh fences do not have top rails like they do in North America, and since it never freezes, it’s perfectly okay to have holes drilled in posts. Here’s how the various types of wire used for this type of fence are an important part of the structure. Straining wire Either feed the wire through holes in the posts or along the fence side. If feeding along the side, loosely tie the wire at the correct height, or with timber, attach the wire with staples - do not fully trap the wire at this point. Diamond mesh and rolled welded wire mesh fences in warmer climates don’t have top rails, but they still need something to support the wire mesh. Tip: To view the product code and full product table on mobile please tilt your device to landscape.Demonstrate all new work techniques as you come to them. This will save mistakes and avoid accidents.

Staples should be put in diagonally and only driven home on straining posts. On other posts the wire should be free to move. Work out the exact line of the fence and the positions of the straining posts. These are usually determined by the lie of the land (a post at every change of direction or major change of gradient), but straining posts can be up to 110m apart, although 50m is preferable. Ensure all team members are wearing appropriate footwear and clothing and issue specified safety equipment. Introduction All fencing installations should have a line wire installed at the top to stop the fencing sagging and keep it taut. We also recommend a line wire be installed at ground level to stop people, or browsing animals from crawling or digging underneath. For meshes above 1.2 metres we would advise an additional galvanised line wire be installed in the middle as well and clipped to the wire mesh or plastic filaments. Lay out materials, describe any potential problems and indicate the positions of the straining posts (decide upon these now if you have not already done so). Demonstrate tool use

8 Gauge steel fencing line wire features and uses:

Galvanised Straining Line Wire is manufactured from steel which has been galvanised with a zinc coating to help it withstand the elements, resist rust and corrosion, and remain strong. The wire is used to ensure that the top of fence netting or mesh is tensioned and taut, providing strength and helping to prevent damage to the fence by animals or vandals. This wire is also available with a PVC coating for use with PVC-coated fencing. If roll of chain link fencing runs out before the end of a run, join the rolls by removing a spiral from the end of the roll to be joined on to. This is easily achieved by releasing the ends of the first spiral and winding the spiral along until it is fully removed. Bring together the end of one roll with the beginning of the other roll and reinsert the removed spiral but this time 'knitting' the two rolls together - when fully inserted, close the ends of the spiral which was removed. Splitting a roll of fencing To finish off, saw off any minor damage to the posts, nail up splits and ensure cut wire ends are sunk into the posts. Rabbit netting, chain link and palings