Parts Emporium VW Volkswagen Used Aircooled Spares and Cars in the UK. Beetle Bus Buggy Camper Cabrio Splitty Split Bay Transporter Volkswagon T3 T4 Parts Emporium VW Volkswagen Used Aircooled Spares in the UK Bug Beetle Camper Buggy T3 Parts Emporium - Used Type 2 VW Camper bus bay split splitty microbus t25 and Shroud (You will need pulley, tensioner and belt as they are missing). Collection only.Update - Possibly Bergman Kit - if (R2 > 1196 && R2 < 1000000) {digitalWrite(in1, LOW); digitalWrite(in2, LOW); digitalWrite(in3, LOW); digitalWrite(in4, LOW); digitalWrite(in5, LOW); digitalWrite(in6, LOW); digitalWrite(in7, LOW); digitalWrite(in8, LOW); } raw= analogRead(analogPin); if(raw) {buffer= raw * Vin; Vout= (buffer)/1024.0; buffer= (Vin/Vout) -1; R2= R1 * buffer; Serial.print("Vout: "); Serial.println(Vout); Serial.print("R2: "); Serial.println(R2); delay(50);

https://www.heritagepartscentre.com/uk/ac198880f-barrel-piston-kit-1679cc-88mm-x-69mm-cast-machine-in.html Next replace the switches of the Pontiac ones with MOSFETs, which in turn are controlled by the Arduino signals. Note that you need high side switching, so p-channel MOSFETs, and that in turn requires a second transistor (small signal NPN or BC547 will do great) to switch it. Genuine NOS VW distributor points part number 111 998 061 for Garbe Lahmeyer & Co VW badged distributor from the early 1960swedge Parts for sale Parts Emporium - VW wheels volkswagen used tyres Parts Emporium - VW Beetle Parts For Sale volkswagen bug buggy type 1 t1 It is not mentioned in the schematic, but those "illumination" LEDs should have a current limiting resistor of sorts. You may be able to replace those resistors with a lower value and run the LEDs themselves off 5V. Otherwise it may be possible to simply replace the LEDs themselves for a set of your own, with appropriate resistor for 5V supply. Inventing fake beetles shiny enough (right) to test mirror-gloss with real predators took visual ecologist Amanda Franklin and her colleagues weeks. The scientists then scuffed half of their pretty models (left) to make matte-finish fakes, before setting them loose in the wilds of Australia to see which looks drew hungry birds. A. Franklin like these? - https://www.heritagepartscentre.com/uk/ac198900-barrel-piston-kit-1776cc-90-5mm-x-69mm-forged.html

if (R2 > 626 && R2 < 909) {digitalWrite(in1, LOW); digitalWrite(in2, LOW); digitalWrite(in3, LOW); digitalWrite(in4, LOW); digitalWrite(in5, LOW); digitalWrite(in6, LOW); digitalWrite(in7, LOW); digitalWrite(in8, LOW); }

if (R2 > 966 && R2 < 1029) {digitalWrite(in1, LOW); digitalWrite(in2, LOW); digitalWrite(in3, LOW); digitalWrite(in4, LOW); digitalWrite(in5, LOW); digitalWrite(in6, LOW); digitalWrite(in7, LOW); digitalWrite(in8, LOW); } Actually looking again at the schematic I see four toggle switches, which at a glance appear to be in H-bridge formation. That would suggest you can use a dual motor driver.