It also has 2 stages brightness as Brighter for Daytime as DRL and Dimmer for Nighttime Parking Light.

The reason everyone is saying the headlight is not compatible is only due to the car having AFS and the headlight not being equipped with AFS.

Whether it be aftermarket or OEM, Navan products are notably DOT / SAE (USA, Asia) certified, and equip many vehicles around the world. The high-end headlight gameplay of welcoming guests and breathing improves the safety and appreciation of driving. You can easily install onto the spec-d tuning headlights an H1 bulb by Sylvania which auto parts chains sell as well as Walmart if I remember correctly. Many drivers prefer HID headlights because they can see farther, and other drivers can see the car from a distance. When you are facing the same way as the car is facing, the steering wheel is on the left side, that means your car is the left-hand drive.

Our SMD halos feature these chips installed onto a sturdy CAD-designed circuit board that easily mounts to a light housing using the pre-installed 3M adhesive tape backing. You will need to remove the signal bulb from the old lamp (do NOT disconnect any wires) and install it, in its existing housing, into the new lamp.Since I live in Hawaii and don’t really do anything besides city driving, I decided I would go with the Vland headlights which are LED only but they look good and were a little cheaper than outright replacing the old with OEM. and then you would have to glue the lens back in place with same glue which again easier said than done.

Some Parking lights come with two (running lights, ground) or three (running lights, turn signal, ground) wires. Once you can see everything, unhook any and all electrical connectors from the back of the headlight assembly. For your new headlamp assemblies, remove them from the box and ensure that there is no physical damage. Look for hold-down bolts in the metal body panels above and to the side of your headlamp assemblies.

In short - if they are not cracked then simply polish them, or if they are really really bad, then you can as well replace them altogether. To do so, find a white wall and a level surface to park on – you can do this inside or outside, but the ground must be level and the wall flat and vertical. Introduced to the high end vehicles around year 2003, the AFS differs from Auto-Leveling that moves up and down, instead moves the headlight beam left / right to help driver see the upcoming curved road better. Using high brightness LED lamp beads, the streamer follows your left and right direction lights, staged a unique streamer show.

Lexus car owners with GS models from 1993 to 1997 can find sellers with IS 250 headlights compatible with the car. other times, some people would put an LED in the high beam spot but you lose the high beam function and only have the DRL working, something about the differences in power between DRL mode and high beam mode. sinister2c has a lot of good posts that I'm trying to understand, I just don't know which name goes to which component of the lights. this video will show you how to disable the AFS off message you’ll get after installing your headlights. DRL stands for Daytime Running Light which originally was developed and used in countries that are more prone to foggy conditions and it is a safety feature which has now become standardized by many car manufacturers.Let's ditch the old, and modernise the look of your Lexus IS250 / IS350 / ISF with a sharp new look. If you did this, you’d need to find a good place to zip tie, 3m dual sided tape, or some way to secure the ballast to the car somewhere to minimize movement and potentially disconnecting. The most advanced AFS systems use GPS signals to anticipate changes in road curvature, rather than simply reacting to them. White LED Strip is Daytime Visible bright, 10W Osram LED chips, Brighter than any on the market with supreme quality of Osram! Wire for activating the DRL is provided by the manufacturer, which runs straight to your battery, Plug and Play, easy installation.