Do not twist the blade during cutting or when removing the blade from the runner after cutting. Doing so causes a rotating force to apply to the blade and can cause it to break This is going to less of an objective review and more of a personal impression post. The comments within this article are my opinion as a builder that has used a wide variety of nippers from various companies. The good news: this was definitely the most precise tool I've ever used to cut parts from sprues. The bad news: on my second kit using these nippers, while cutting a part off a sprue, a huge chunk of the tool just broke off.

god - Reddit How many kits did you build before you bought god - Reddit

You use God Hand nippers like a similar product from another brand. You’ll use a nipper to carefully remove small bits from your model parts, giving them a perfect overall appearance. God Hand offers nippers made for both plastic and metal models. What Makes God Hand Nippers Good?Never cut pieces that exceed the cutting capacity above or non-plastic materials (metal, resin, paper, etc ...) When cutting small parts, it will not fly away. It will decrease the amount of time spent searching for the fly away parts. A stress mark is still visible on the tree material, but the cut is completely flat; additionally the edges are much smoother. In my opinion – the wisest option you can get on the market today. They are number two fro two reasons. First is because of the flawlessness of Number 1 in this list. Second reason is the price. Compared to the best listed further down there is a significant difference on the tag. Number one are not that better, so to cost twice as these nippers here. MT103 is an improved model, stainless steel and they come from Japan. Guarantee for quality. GSI Creos is mentioned twice in this list here, so that must mean something too. Number 1:

God Hand Nippers - Toproductoo 9 Best God Hand Nippers - Toproductoo

In this first image I made a cut using the standard nippers. As you can see in the image these standard nippers appear to have crushed more than cut and the plastic is a bit stressed.Hearns Hobbies is a Melbourne Manufacturer of Resin Figures, Diorama pieces, RC Parts and much more! Pin for preventing opening excessively: The pin has been changed from metal to resin. The pin has a tapered shape, so, it prevents the pin from being pushed in further by a force. Similar to any type of scissors, theicle nipper can become dull over time. Dropping your nippers will cause you to bend the blades. What is a nipper used for? If you look at the full size image you're going to notice that the cut isn't quite flat. Rather it forms a very slight peak in the center of the cut. The edges are also a little rough.