In terms of eco-friendliness, both adhesives are safe for the environment. However, Pallmann P4 adhesive is a better choice for you if your customers are looking for a completely solvent-free adhesive. Which should you choose? Pallmann P4 adhesive and Bona R848 adhesive are two popular choices for wood flooring installation. Both products are known for their strength, durability, and ease of use. In this blog, we will closely examine each product and compare its features.

According to ISO 17178, Bona R848 is an elastic 1-component silane-based adhesive for dimensional stable multilayered, engineered parquet. Tensions to the sub floor are reduced. The use of a primer is in general not necessary. The adhesive hardens by a chemical reaction with moisture. Bona R848 is an elastic 1-component Silane based adhesive for dimensionally stable, multi layered engineered parquet and solid boardsFor full application and coverage details, please refer to the 'Technical Information' Datasheet link above.

Bona R848 adhesive is also VOC compliant, which means it contains low levels of volatile organic compounds. This makes it safe for both the installer and the environment. Here at Ultimate Floor Care, we sell this product in the following ways: One of the main advantages of Bona R848 adhesive is its high bond strength. They designed this to provide a durable, strong bond that can take heavy foot traffic and other types of wear and tear. This adhesive also has a long working time, allowing for easier flooring installation and adjustment. Pallmann P4 adhesive is a one-component, water-based adhesive. They designed this product specifically for wood flooring installation. This adhesive is ideal for engineered solid wood floors; you can use it on concrete and wood subfloors. You can also use it on plywood, calcium sulphate screed, cementitious screed, and concrete. Winning by a Point: Creating Loyal Fans for your Wood Floor Sanding Business Just Like the Rugby World Cup Final 🏉Do not allow more than 30 minutes of open time before firmly setting flooring into the adhesive. Higher humidity can decrease open time layered pre-finished parquet, boards and solid wood planks (max. 22 x 120 mm): approximately 1350 g/m², Bona Trowel 1250 F or 1250 G The surface should also be slightly textured. If applicable, it must meet the requirements of local standards or codes of practice. If necessary it should be professionally prepared for laying. A primer is typically not needed. If the subfloor is problematic the use of a primer like Bona D501

Disposal: wastes and emptied container/tubular bags, should be handled in accordance to local regulations. Pallmann P4 adhesive is also eco-friendly, containing no solvents or isocyanates... This makes it safe for both the installer and the environment.Sandblasting, shot blasting or scarifying may be necessary to completely remove some of these residues As a water and solvent-free adhesive, Bona R848 causes nearly no swelling of the wood once it has been installed. Remove all existing traces of adhesive residue, paint, concrete curing compounds or other contaminants that may affect the adhesive bond Cleaning agent: Bona Cleaning Wipes, Bona S100, acetone, ethanol. Hardened adhesive can only be removed mechanically.

Before use, ensure the air temperature is above 18°C, the floor temperature is above 15°C (with under floor heating max 20°C) and the relative humidity is less than 70%. If necessary, bring the adhesive to the right temperature. Bona R848 adhesive is a one-component, moisture-curing adhesive. They designed this product specifically for wood flooring installation. This adhesive is suitable for all types of wood flooring, and you can use it on both concrete and wood subfloors. Goods supplied incorrectly entirely through the Company’s fault will be re-supplied at no cost to the Customer. Easy to clean properties which mean it won’t harm the finish on hardwood floors and pre-finished trim. When using Bona R848, the use of a primer is generally not necessary if the subfloor and conditions are suitable - if you're unsure, our Technical Team will be able to advise.Particularly suitable for the installation of parquet with low movement (such as engineered parquet and mosaic parquet flooring), Bona R848 adhesive 15kg is a one-component product that’s safe to work with and easy to handle. When it comes to comparing Pallmann P4 adhesive and Bona R848 adhesive, there are a few key differences to consider. Pallmann P4 adhesive is a water-based adhesive, while Bona R848 adhesive is a moisture-curing adhesive. This means Pallmann P4 adhesive cures faster and is easier to work with. At the same time, Bona R848 adhesive provides a stronger bond but takes longer to cure. Storage / transport: the temperature must not fall below +5°C or exceed +25°C during storage and transport. Store in a cool, dry, well ventilated place. Spread adhesive on the substrate while holding the Bona trowel at a 90° angle, using a smooth semi-circular motion