The Maxus Max is pretty simple to use compared to a mod kit, but a little more complex with more features than many AIOs out there. Here’s a rundown of basic operations: Please refer to the data protection section of our terms and conditions for information on how we handle data.

The screen displays the wattage, live voltage when firing, battery meter, and resistance. As for modes, you have Power mode, Temp control mode for SS, Ni, Ti, and TCR, bypass mode, and VPC.As with recent Freemax devices you are getting bling – if you want it! The front and rear panels have separate adjustable lighting effects which you can change and alter the colour.

The up and down buttons are on the front right below the screen, while the firing bar is on the left side of the device. I personally prefer firing bars over buttons because you can just squeeze the mod to fire it with either hand. It’s a very symmetrical design that works good for both right and left-handed vapers. Estimated delivery time is between 3 and 5 days. This is not guaranteed. Please allow up to 10 days ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly. For the coil performance, I started with the MX1 coil and found it best to be around 70 watts. The flavor was great, and I got 100 mL of juice out of it before it went bad, so it was an excellent coil. Then I used the MX2 coil. I found it best around 80 watts, which proves that both coils are very accurately rated. And it performed very similarly to the MX1. Not much of a difference. Both are excellent. Even though there are multiple modes, the Maxus 50 remains easy to set up and use thanks to a simplified menu system, while the battery inside has also been designed to make sure the kit lasts longer between charges. Combined they make the Maxus a simpler kit that you can rely on all day. When it comes to modes, there’s the option of Variable Wattage, as well as Temperature Control and even Variable Power Curve which allows you to programme a series of power levels that the device will fire at in a row - for your own perfect inhale.After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance. The Freemax Fireluke 3 has a sliding top that makes filling easy. When you examine the tank’s top hardware, you’ll see a coloured marker. Place your thumb on the marker and push gently to slide the tank open. That’ll expose the filling hole. Add e-liquid through the hole until the tank is nearly full before pushing again to close the lid. We refuse any liability for seized goods or additional custom fees. You are responsible for any items once they have left the UK postal system One of the innovations of the Fireluke 3 tank is that the top hardware has steel bearings to provide friction and help prevent the tank from popping open at an inopportune time. You may find, however, that the lid is a bit difficult to open and close when the tank is new. It’ll loosen as you use it. How to Replace the Freemax Fireluke 3 Coil

The Freemax Maxus Vape Kit is an advanced vape kit boasting both high power output and impressive performance. Freemax is renowned for manufacturing premium-quality vaping products that are as aesthetically pleasing as they are functional. Utilising cutting edge technology the Maxus 200W Vape Kit is expertly crafted to provide the best possible vaping experience. Never charge your battery at a higher amp than what is indicated by the manufacturer. To calculate the maximum amp level to charge your battery: The MPro 3 tank is compatible with the Freemax M Pro 3 Coils and MPro 2 904L coils adding another layer of customisation to your kit. No matter which coil you prefer, we suggest pairing them with e-liquids that are 70% VG and higher.

Comes With

Output wise this is specified as 5-200W (6.6-8.4V) and you have Power (Variable Wattage), VPC ( Custom Curve), Bypass, Temperature Control and TCR user modes. For example : 3500 mAh would become 3.5 amp (maximum allowed). What do I need to know about storing lithium batteries safely? Always buy your battery products from a reputable company, such as Vape Shop, who can offer you quality assurance and safety. We urge customers to use our DPD Next Day delivery services 2 days prior to any Bank Holiday to ensure that your delivery arrives before the bank holiday This kit is completed with the Freemax MPro 3 tank and two mesh coils to get you started. The Maxus 2 is ideal for sub ohm vapers who want a kit that balances style with power.