Video ON/OFF..........................................................................................11 Camera Control ........................................................................................ 14

Power Saving mode .................................................................................. 15 The Motorola MBP36S is an overall solid baby monitor with an excellent built quality. But it has now been surpassed by newer models, such as the top-performing Eufy SpaceView that is performing better on nearly every aspect. In general, it’s thus hard to recommend the Motorola over the Eufy. But if you need more than one baby camera at once, the MBP36S has a great deal for its two cameras bundle.It is absolutely brilliant. I would highly recommend it. The image is clear even when the light is dim, the battery lasts long enough. When the camera is on I can use it 2 consecutive days with no charge. I normally use it only at night for 3-4 hours when the baby is asleep. This gives me an opportunity to spend some time with my husband not worrying that I would not hear the baby. Answer: Yes. You just need to press and hold the microphone button on the monitor while talking to speak through the device in your baby’s room. Answer: Yes. When you use the two-way communication feature, your voice only goes to the camera that is currently selected. Volume....................................................................................................... 13

In our testing, the Motorola MBP36S camera produced an average EMF reading of 2.25 mG when placed 6 foot / 1.8 meters away from our baby’s bed. This is very close to the maximum limit recommended by the Environmental Protection Agency which advise to limit your exposure to 0.5 mG to 2.5 mG at a time. The further you place the camera from your baby, the less EMF they will be exposed to. The MBP36S emits one of the highest level of EMFs across this category of devices.

CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or DOWN button to select the desired CAM and press the O button to One feature that’s a nice bonus that we don’t see everywhere is the built-in room temperature in both Celsius and Fahrenheit. It will show the temperature in each room on your display. If the room is too warm, for example, the temperature will appear in red instead of blue. That way you can make sure that your baby’s room isn’t too hot or too cold. The Motorola MBP36S Digital Video Baby Monitor has been designed to make monitoring your baby safe and easy.

Temperature.............................................................................................. 15Answer: Press and hold the PAIR key underneath the camera unit for at least 3 seconds. The LED light will flash green to indicate that the camera is in pairing mode. On your parent monitor unit, you will see the new camera appearing in the add camera menu. Just select the new camera and you’re done.