Do not overcoat the anti-mould finish (or wallpaper over it) as this will effectively seal in the mould resistant finish and allow the mould to grow back. Add PermaPROTECT Anti Mould Paint Additive to any paint type to create a powerful mould resistant coating.

Leave the surface to dry (this should take approximately One hour) and ideally paint within 7 to 10 days of pre‐treatment. While anti mould paints are perfect for preventing mould from developing on surfaces, painting over an already mould area will not solve the issue. Here at ACS Limited we always recommend cleaning and performing a mould wash before applying anti mould emulsion, or any other type of anti mould paint to the area.Ensure that window trickle vents are open, brick vents are uncovered and partially open bathroom windows when showering or bathing to reduce condensation. Note: Clean any non‐mould related contamination by wiping with a damp cloth and or sugar soap as required. Note: Once frost damaged the product is unusable and cannot be recovered by warming up or any other means.

This provides peace of mind that the contained biocides are approved for use and safely incorporated into our products. or similar is to be used then it should be hung after the Dryzone 100 Mould Remover has fully dried. For more information on getting rid of mould, then read our guide on how to remove mould from walls. Dryzone Anti-Mould Additive is compatible with all types of paint; including emulsion, vinyl, silk or matt paints.This is especially significant when treating mould because mould commonly derives the moisture it needs to grow from condensation. Wash and clean all surfaces (walls, ceilings, window frames and joinery) using Dryzone 100 Mould Remover.

If the project you are embarking on has suffered from damp and mould before, there is no need to worry, as long as you take the preventative steps to ensure that the area is clean and free from mould, you should be able to paint over previously mouldy walls with no problem.

It can also be added to our “Kingfisher Weatherflex range of masonry paints in areas where green mould growth is prevalent on building exterior. Any remedial treatment you choose should always be accompanied by an effort to improve healthy airflow. With our PermaPROTECT range, our aim is to support your ongoing mould prevention strategy with affordable, lasting solutions. Wash and clean all surfaces (walls, ceilings, window frames and joinery) using Dryzone® 100 Mould Killer.

Special fungicidal additive that can be added to ordinary emulsion paint to convert it to a special anti-mould Each 50ml pot will convert 2. If necessary, apply an appropriate primer or sealer to new, unprimed or porous plaster and wooden surfaces or bare metal.Dryzone100 Mould Remover is a biocidal cleaner designed to remove mould from bathroom and kitchen surfaces with long-lasting effect. Try to draw the sponge in a single sweep from the outer edge to the centre of the infected area and rinse in the dilute solution each time. When you are looking to refurbish and redecorate, you will probably have a specific colour palette in mind, however some anti-mould paints will only be available in plainer colours. This product will help clean and kill off very heavy growths prior to application of the AdPaint treatment. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH).