These are very easy to navigate and books are generally more affordable. With these devices, you do have thousands of books available at your fingertips at any given moment. Combi drill or drill press - I used a combi drill to create my thumb holes, but for accuracy, a drill press is better (although not an everyday home DIYer tool!) Finally, if you want a glossier finish, use a buffing wheel. I use the Beall Wood Buff System in my shop, and had I know how nice it was I would have bought it a long time ago. Readers with medical conditions such as Parkinson’s disease, arthritis, or muscular dystrophy find it especially hard to read their favorite books without constantly losing their place when the book accidentally snaps closed. I like this finish because it is natural, easy to work with, and leaves a nice satin glow to the piece. The look is more traditional, and handmade.

I also rolled up some sandpaper in the thumbnail to smooth it. But a spindle sander attachment in a drill would work too! Bench sander or heavy belt sander upside down - To tidy your cuts, you'll need to do a lot of sanding. If you don't have either of these, I have been known to hand-sand things while watching TV 😂 And sandpaper for the thumb hole is a good idea! Only serious readers will understand the struggle of trying to hold a book in one hand without it constantly closing on you. This project was created as part of my 12 Days of Giftmas series and includes a how-to video you can follow along. Jump to:Bandsaw- this has a narrow blade to cut out curvy shapes in wood. If you don't have one, you could use a coping saw and do it by hand (much slower), or a jigsaw, providing you've clamped it well. A scroll saw is also great for the job! But for speed and accuracy around the curves, I used a belt sander upside down as this one is so heavy, it doesn't move about. Or you could use a bench sander. Sheet of paper, pencil and scissors - you won't need to waste money buying a template or plans on Etsy here as we'll fold the sheet of paper and cut a quarter of a circle, then open it up to reveal our design. Simple! Can you stain the wood before varnishing? Yes! Make sure it is fully dry first. Or, if you're using a coloured preservative, you'll need to let the oils soak in properly for 2 weeks prior to varnishing. A tip Cuprinol once told me! ➕More Handmade Gifts on a Budget Alternatively, you could use a water-based stain to enhance the colour, and leave to dry before varnishing.

Go over the entire piece and make sure that everything is very smooth. Don’t skip on this part of the tutorial. Other Book Holder Design Ideas - mine is very simple, but you could draw a Batman logo, a love heart, or a Harry Potter Snitch. Why not have fun and get creative? Drilling a Thumb Hole To prevent a tear out while drilling your thumb holes, only drill until the pointy end is poking on the other side, then do it from the reverse. Or you could clamp a sacrificial piece below. If you want to learn more about finishing, my 10 Step Guide to Wood Finishing is a free PDF that explains how to use hand applied finishes. There is no fancy equipment to buy, and anyone can learn how to apply a great finish.Another good alternative is, of course, to switch over to ebooks that you can read on a tab or e-reader.

Buff the piece with Tripoli, then use the White Diamond compound. Then, buff with Carnauba Wax for a little more shine. Finally, inspect the piece for an even sheen, and touch up any spots that need it. or 25mm Flat wood drill bit - this is necessary as a minimum to drill thumb holes. I'm female and the 22mm hole is fine, but males or anyone with bigger hands may need 25mm +. However, if possible, try to use a Forstner bit instead for a cleaner cut. There are quite a few handy gadgets you can buy to help you keep that book open while you read or attempt to multitask. But not all products and inventions are quite as functional as they may seem. Spending a fortune on a fancy book holder won’t help much if you never end up using the device. The Fellowes wire stand is the best book holder if you want something that allows you to carry your book in one hand or put it down in a standing position for easy reading. This little reader is quite affordable, simple to use, and it is very light. Best For CookbooksNext, place your stencil on an offcut of hardwood and draw around it. Or you could draw inside the hole of your large sheet of paper. If you find it difficult to keep your book open with one hand or even in general then you are in the right place because we are going to share some of the best products for overcoming this annoying problem for good. The Best Products to Get For Holding a Book in One Hand Have you got any advice on cutting hardwood to prevent the blade from turning? You may need to tighten the tension on your blade and that it's close to the bearings. Also, ensure the guard is as low as possible (close to the project as possible) to prevent the blade from wobbling. Safety goggles& ear defenders - if you're using power tools, then wear your PPE! Also, if you're sanding lots, I recommend a dust mask to protect your lungs!

If you have a cookbook stand, and a cook book that you like to use, it’s better to leave it on the stand than to try and one hand it while cooking. A wooden thumb book holder is a fun, eco friendly project to make, and when a nice finish is applied, it looks amazing. Select a nice piece of wood and a traditional oil finish for this project and you will love the results. I cut mine with a bandsaw, but if you don't have one, you could clamp the waste of the material to a workbench and use a jigsaw.My article on Finishing with Tried and True Danish Oil explains the finishing process, and it is very easy to follow. Finally, finish the thumb book holder with an oil finish. This can be Tru-Oil, Danish Oil, or Tried and True. For this project, I used Tried and True Danish Oil.