Loop decay is able to be turned on and the decay rate can be set in the song settings. Currently the decay rate cannot be changed without stopping audio and saving the song. hours mono, 1.5 hours stereo recording time (20 minutes per song) using internal storage and up to 48 hours storage when using an SD card. With the proper stereo outputs, you can hook up directly to the PA system at your gig (assuming there's one available).

And learn the foundations of looper music by mastering the difference between mono and stereo recording, recording time management, audio cable management and device maintenance.I/O: two 1/4″ (6.35 mm) inputs, two 1/4″ (6.35 mm) outputs, one 1/4″ (6.35 mm) stereo aux input, one 1/4″ (6.35 mm) stereo aux output Set the Auto Record threshold in the Behavior Settings to control what audio level triggers recording.

Read on to hear about some of the big additions. But first, we want to give you an important heads up. Aeros Loop Studio is Changing File Types Unlimited overdubs enable you to create layers and depth in your loops without worrying about restrictions. I bought the additional midi input cables to connect the Beat Buddy, and while I am not the most midi-savvy human, I was able to easily set it up with the BB as the master, then decided perhaps I'd prefer Aeros as master, and changed the config easily and its all working in an intuitive manner for me. The inspiration has continued beyond beats. The Aeros even motivated me enough to finally reach my goal of starting to incorporate synth into my songs! Arturia kindly gave me a license to Analog Lab V—and I highly recommend it. I’ve been layering in simple arpeggios I made using the tool. Two things that would markedly improve this are: a desktop interface (the app works fine but yeah) and most importantly...Added auto-decay: Lowers the volume of previous audio layers with each additional overdub. Decay level adjustable in song settings There is Bluetooth, but we have not built that feature yet however it is a good idea and we are looking into it and building it. The Aeros uses an algorithm to define the tempo of the recording you just made based on the start and stop point of your recording.

Can the Aeros store up to 48hrs of songs via SD card, is that in stereo or mono? And how many songs can it store? Important note: When using the BeatBuddy and sending out Transition commands to the BeatBuddy from the Aeros, this will only work if the BeatBuddy has Transition Forgiveness on. This is only available in the latest beta of the BetaBuddy Firmware v4.1.3. We have completely redesigned the UI of the looper to be hands-free, organized, and just all-together beautiful, as well as building many much requested features. Restored master volume to default neutral level after loading a new song. Previously master volume was at the level it was last set to.

WATCH: Get to know the LD Systems Maui G3 PA System

When using the Aeros and BeatBuddy together, the BeatBuddy will control the tempo and time signature. Pressing play on the BeatBuddy will start the Aeros, and stopping the BeatBuddy will stop the Aeros. In addition, both pedals will sync song part changes. If you are currently on a version earlier than 5.0.0 and you have previously recorded material stored on your Aeros’ internal memory and/or the SD card, you should read the following instructions to ensure a smooth update process.