The camera may work in extremely cold conditions as low as -25°C as it will produce heat when powered on. You may power on the camera indoors for a few minutes before installing it outdoors. Argus Eco, E1 Outdoor, E1 Pro, e1 pro PTZ, RC410, RCL-410, RCL-810A, reolink: rlc-410-5mp, rlc 410w, rlc-410-5mp, rlc-411ws, RLC-423, RLC-510A, RLC-511, RLC-520, RLC-520-5mp, rlc-522, rlc-810a, RLN16-410 You may power on Reolink PoE cameras via PoE injector/switch or PoE NVR directly, or by using the power adapter.

Not all camera models generate ONVIF push events for all event types, some binary sensors might, therefore, only be polled. Do not point the camera toward a glass window. Or, it may result in poor image performance due to the window glare from infrared LEDs, ambient lights or status lights. C1 Pro, DUO POE 2, E1 pro, RCL-511W, RCL-520, RCL-810A, Reolink 411, reolink: rlc-410-5mp, rlc-410-5mp, RLC-510A, RLC-520, RLC-520-5mp, rlc-810aFloodlight turn on brightness controls the brightness of the floodlight when it is turned on internally by the camera (see Floodlight mode select entity) or when using the Floodlight light entity. If you fail to add Reolink cameras to Synology, please follow the below steps to make troubleshoot. If you just receive your new camera and are not familiar with the camera, you can have a look at the below video about unboxing, setup and installation of the camera. Guard set current position will set the current position as the new guard position. Select entities My RLC 520a is running the latest firmware 3.0.0.494 and I have also tried the previous version 3.0.0.250.

PTZ left, right, up, down, zoom in and zoom out will continually move the camera in the respective position until the PTZ stop is called or the hardware limit is reached. Step 1. Use the mounting hole template to drill mounting holes on the ceiling, and plant the rubber anchoring into the mounting holes. Furthermore, the RLC-520A also relies on the 5-megapixel sensor and the 2560 x 1920 (Super HD) resolution to give you a crystal clear look not only during the day, but also during the night (the IR vision can go up to 100 feet before some noise creeps in). And if that sounds an awful lot like the Reolink RLC-510A, well, it’s because they’re essentially the same device, but with a different skin. iSpyConnect has no affiliation, connection, or association with Reolink’s products. The connection details provided here are crowd sourced from the community and may be incomplete, inaccurate or out of date. We provide no guarantee or warranty that you will be able to connect to your cameras using these URLs.

After that you can disconnect the LAN cable and the camera will automatically switch to the Wi-Fi connection. Connect your PoE camera to the PoE NVR by a single network cable, then the PoEcamera will get power via the PoE NVR. I have been using Reolink cameras for about 2 years connected to Synology Surveillance Station (SSS). About 6 months ago I upgraded my 4 cameras to RLC 520a's as I really wanted the person detection features. With the latest firmware this works beautifully with SSS - triggering it correctly according to my camera settings. Follow the on-screen instructions to first setup the credentials (use the same credentials in Home Assistant).