According to PCI-SIG, graphics cards are capable of exceeding their maximum power by 3 times. This is especially the case for high-performance graphics cards such as the NVIDIA GeForce RTX 3090 Ti or the upcoming NVIDIA next-gen graphics cards. It is believed that the upcoming graphics cards need 600W of power and will have power excursions up to 1800W. The power excursions only last 100 microseconds but can already heavily disrupt the computer system. Power excursions are also known as power spikes by many people. MEG Ai1300P PCIE5 Testing Result With native 16 PIN PCIe connector this power supply is ready for Nvidia® GeForce RTX® 40 Series graphics cards. It can freely pipe up to 600W of power to PCIe 5.0 graphics cards. One interesting feature MSI have incorporated- the two panels on the side are held in place magnetically, so they can be easily removed and flipped – depending on your chassis install rotation. This way you get to see the ‘MEG' logo as you want (or you could in theory remove them completely to get rid of some of the gold accenting if you wanted). These do have a tendency to drop off quite easily so you need to be careful when handling the power supply.

Aiming for unwavering product quality and performance stability, the power supply comes with 100% Japanese 105° C capacitors and solid capacitors. Real-Time Power Status Monitor: Through the MSI Center, this power supply helps monitor the real-time status of the percentage of power supplied to GPU and CPU and the total system wattage used. That being said, please stop with the needless jabbing, the question falls onto the brand that sent the review sample out, not the person who opened up the unit to report what he'd seen. You're also talking about Aris, here. You're sneezing towards the wind. The efficiency of the MSI MEG Ai1300P does meet the 80Plus Platinum certification requirements when it is powered from an 115 VAC source. However, when the main’s voltage is 230 VAC, the efficiency is raised by an average of 1%, which is not enough to meet the 80Plus Platinum requirements for that input voltage. The average nominal load efficiency (20% to 100% of the unit's capacity) is 92.1% with the unit powered from a 230 VAC source, and drops down to 91.3% if the unit is powered by a 115 VAC source. It is also interesting to note that itsefficiency under very low loads is quite high, at above 83% for a 5% load. Multi/Single Rail Switch: It can switch between single and multi-rail according to the needs of users while taking into account high current output and safety protection.

OCP

Regardless of the somewhat daft naming – this 120mm fan has been used by MSI quite extensively since 2016 – under the ‘TORX fan' naming. The model PLA12025S12H-4 has been used with various MSI products, including CPU coolers. The efficiency of the MSI MEG Ai1300P does meet the 80Plus Platinum certification requirements when it is powered from an 115 VAC source. However, when the main’s voltage is 230 VAC, the efficiency is raised by an average of 1%, which is not enough to meet the 80Plus Platinum requirements for that input voltage. The average nominal load efficiency (20% to 100% of the unit’s capacity) is 92.1% with the unit powered from a 230 VAC source, and drops down to 91.3% if the unit is powered by a 115 VAC source. It is also interesting to note that itsefficiency under very low loads is quite high, at above 83% for a 5% load. Kitguru says: The MSI MEG Ai1300P is a high performing power supply with interesting software enhancements that will appease the high end enthusiast audience. This modern design adopts quality internal components with 105c rated Japanese capacitors to help justify the eye watering asking price. Correctly testing power supplies is a complex procedure and KitGuru have configured a test bench which can deliver up to a 2,000 watt DC load. Due to public requests we have changed our temperature settings recently – previously we rated with ambient temperatures at 25C, we have increased ambient temperatures by 10c (to 35c) in our environment to greater reflect warmer internal chassis conditions.

In light of the new ATX 3.0 standard, we took a shot at adding power excursion compliance testing into our articles. Given that this is the big addition to the ATX 3.0 specification– and indeed its very reason for being – it’s where we would like to see if PSUs are truly living up to the very high standards set by the new specification. One strong suit of this PSU is that like all high-end 1000W+ designs, it comes with six independent PCIe power connections. Why is this important? Well, future graphics cards are going to resort to the new Gen 5 connectors and you'd either need to get a proper Gen 5 PSU or a PSU that has at least 3 connectors to meet the demand for next-gen high-end cards. You can either use them or simply plug in the 12VHPWR connector for the NVIDIA RTX 40 series graphics cards which saves you the hassle of cable managing all those extra connectors.Inside the outer box is a bag of cables and accessories and the power supply itself, wrapped in a plastic bag, sandwiched between two pieces of foam. Nevertheless, we took a shot at testing the power excursion capabilities of the MSI MEG Ai1300P PCIE and of thefew ATX 3.0 compliant units that we currently have available. We took two approaches:one by assuming that our electronic loads are "ideal" and programmed the exact duty cycle figures that Intel dictates in their guide, and one by trying to take into account the real slew rate times of our loads and calculate the RMS equivalent duty cycle. MSI call this ‘G.I' (Gaming Intelligence) support. I can't say I really have had great experiences with the MSI software in the past and sometimes it would crash on the test system I used, but the software for the power supply seems to show everything that MSI claim. It has an output port that is compliant with PCIe 5.0 and Intel PSDG (Power Supply Design Guide) ATX 3.0, also the power supply can hold up to 2x total power excursion and 3x GPU power excursion.