A Tyrolean finish is usually applied as a finishing coat over an already rendered surface, see our project here on mixing and applying render and also see this project here on how to repair and patch rendered surfaces. Exterior finishes such as these really should be applied in dry conditions as rain can easily wash the finish off after it’s been applied, so try and plan your application around any storms. Cover and Protect Vulnerable Objects Tyrolean is a form of cement-based render finish for exterior walls that hels to both protect and waterproof exterior walls from the elements. Benefit from our Tyrolean hire to easily spray and apply roughcast material across interior and exterior walls. A Tyrolean gun uses an adjustable ratchet pressure bar that can easily be controlled. You can then spray out the roughcast material in a controlled way to achieve the textured effect you are looking for.

Toolstation Construction Tools | Builders Tools | Toolstation

You may not be familiar with the name but if someone ever mentions render the image that pops into most peoples heads will be that of a rough and uneven finish on the exterior of a house, this is generally a Tyrolean finish or some type of pebble dashed finish.

How to Apply A Tyrolean Finish to a Wall

Once your rendered surface has been laid on or repaired and has fully cured a Tyrolean final coat can then be applied.

Weber Cullamix Tyrolean Render 25kg White - Jewson

When in operation, the Tyrolean gun throws and scatters the solution out everywhere so even if there is a potentially vulnerable area away from where you’re spraying, air on the side of caution and get it covered up! Once the second coat has been applied you will then need to leave it for 24 hours to fully cure. In some instances if the weather is colder it may take a little longer to fully cure. Apply Paint or Final Finish As there are different grades of Tyrolean finish e.g. small lumps all the way up to fairly large lumps, if you are patching or repairing a Tyrolean rendered area then the new finish is going to need to match the existing finish, otherwise the repair will stand out like a sore thumb! High performance webercem concrete repair system has been specified for a smart exterior makeover to a unique building.With all your potentially vulnerable areas covered and protected, the first task is to mix up a Tyrolean solution that can be applied to our given surface. If you have worked your way steadily and consistently from one end of the work area to the other you should now have a fairly even finish across your work area, however in most cases a second coat is a good idea just to fill in any missed or thin areas.

Draper Tyrolean Flicker Machine 350 x 200 x 338 | Toolstation

Keep your home warm and energy efficient all year round with our insulation, keeping the heat in during the winter and keeping you cool when the sun comes out.. Keep a very close eye on the existing surface and the new surface you are applying and compare the size of Tyrolean blobs. If needed increase or decrease the speed of the gun to adjust the size of the blobs you are applying until they match the existing. Aside from Tyrolean there are numberous other render finishes that can be used on the exterior of a property, some of these include:

🍪 Privacy & Transparency

Coloured decorative finishto be applied onto abase coat, givingan open honeycomb tyrolean decorativerender finish. Colours Its not a good idea to apply render or tyrolean unless your using the correct mix / additives / aggregate etc. With the powder added, use a mixing paddle or whisk as they are also known in an old electric drill to mix the power and water together. At the end of the day im a good sparky, roofer, plumber and basic chippy but im definitely no renderer !