Flexible underframe: The UG-CSC-SYS underframe is the perfect solution for transport to the point of use and the ideal worktable in one. Made for interior finishing:With a guaranteed cutting height of 48 mm, all applications typical in interior finishing can be carried out.

Highly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70°. Dust-free: Chip collection bag for practically dust-free work, even without a mobile dust extractor Power comes from two 18V batteries (from 4.0Ah) in combination with a brushless EC-TEC motor, resulting in performance more than comparable to a mains-powered machine. NOTE: this is a body only machine supplied without batteries or charger. The brushless EC-TEC motor with high speeds of 6,800 rpm guarantees fast sawing progress.Practical: at up to 35 mm cutting height, even angle cuts down to -10°; ideal for undercutting fitting frames The 2x18 V dual battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won't notice any difference compared with mains-powered machines. Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgement. Rip cutting up to a cutting height of 48 mm and a width of 280 mm with a secure support on the integrated fold-out table

Compact and mobile: Can be easily carried with one hand neatly stored in a Systainer format. Even easier to transport with the wheeled UG-CSC-SYS underframe Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgement. Reproducible cuts are ensured. Systainer: Transport and protection; The Systainer hood is easily placed over the cordless table saw, allowing easy transportation and protection. Exact height and angle adjustment by means of electric stepper motors. Adjustable to an accuracy of 0.1 mm and adjustable via display Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital displayCompact and mobile: transportable with one hand in the practical Systainer format. Even easier with the UG-CSC-SYS undercarriage. Flexible undercarriage: The UG-CSC-SYS undercarriage is the perfect transport solution for the place of use and the ideal work table in one. Better with a system: The Systainer³ is compatible with and can be attached to all previous Systainer generations, mobile dust extractors and many more system accessories Repeat accuracy: Height and angle adjustments (mm and inch) are made via the digital display parallax-free, i.e. more accurate than by sight. Repeat-accurate cuts are guaranteed