For the washing station machine, cleaning times may vary with machines from different manufacturers, and use it according to the instructions provided by the manufacturer. The following is the reference for cleaning time, which is suitable for Anycubic Wash & Cure Machines: Model Size The basket is useful when you print a lot of small models. This will allow you to remove the models from the build plate, and drop them in the basket close to the bottom of the tank. You will be able to save some IPA because the models will sit close to the propeller, and they will be washed with maybe half a tank of IPA.

When cleaning the resin models, you can choose to do it by directly inserting the build plate in the washing tank without requiring you to remove the model in advance. A benefit of this cleaning solution is that you are cleaning both the model and the build plate at the same time. If you value premium features such as these, the Prusa CW1S might justify the higher price point. Price Here we’ll look at which model you should choose depending on your uses. When to Buy the Wash and Cure 2.0

The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. Compared to the previous generation Anycubic Wash & Cure Plus, it offers a 20% improvement in curing uniformity*. This results in a more thorough and comprehensive overall curing of the model, ensuring better quality and consistency. Whereas it needs more IPA than manual cleaning, when cleaning small prints like miniatures. Since the machine needs a certain amount of fluid to get the turbo run, sometimes a glass of IPA is all it takes to clean a miniature. Say goodbye to the energy-consuming task of cleaning resin prints by hand, and say goodbye to the time-consuming process of sunlight curing with uneven results. Anycubic offers powerful 2-in-1 washing and curing stations that free you from the hassle of resin 3D printing. Anycubic Wash & Cure Plus is an upgraded version of Anycubic Wash & Cure 2.0, featuring larger machine sizes and functionality enhancements. In this article, we provide you with comprehensive comparison information on Anycubic Wash & Cure Plus and Wash & Cure 2.0 Machine, and hope that it can help you. The Elegoo Mercury Plus 2.0 matches the Anycubic in name but is the smaller of Elegoo’s machines with 131 x 90 x 220 mm wash and 140 x 165 mm cure volumes, putting it more in line with the Anycubic Wash & Cure 2.0. Those few extra wash millimeters mean you have more space to rinse prints, but the curing size remains identical, so not too much of an advantage.

The Wash and Cure Plus performed really well, cleaning the model thoroughly in a short amount of time. The curing lights are a bit lower powered compared to the Phrozen Cure station, but that’s ok considering they are situated on a single side. Some machines, like the Anycubic Wash & Cure Plus, have added extras like an adjustable L-shape LED array extension to cure the top of prints and a reflective base on the UV curing chamber to encourage consistent resin hardening. A washing station machine is the most appropriate choice as its advantages outweigh the disadvantages. In general, it is not as dangerous and expensive as an ultrasonic machine, but also it can reduce work in post-processing and free your hands. So why not just let the cleaning work be handed over to the washing station machine by pressing a button? The Pros and Cons of washing stations machine PROS: The Wash and Cure 2.0 is ideal for those of you on a budget who don’t mind a smaller machine. If your 3D printer isn’t very large or you mostly just print miniatures, then you’ll find the additional cost of the Wash and Cure Plus to be a waste of money.

Anycubic Care+

Allow the washing solvent stay still for over 10 hours so the residue could be precipitated and settled. Though automatic washing and curing is the main benefit of these 2-in-1 machines, it’s also important to have some control of the process. Look for machines with adjustable wash and cure cycle and timer settings with plenty of options. Non-Essential Convenience Features After getting the Anycubic Wash and Cure Plus, my whole resin 3D printing experience changed. The post processing tasks are now partially automated, and I think anyone who does resin 3D printing should get one. Is it worth the extra spend? The additional features and functionality certainly suggest as much. It features a convenient latched anti-UV cover that, unlike other wash and cure stations, doesn’t need to be removed entirely to access the inside.

Compared to its predecessor, the Wash & Cure Plus, the successor version , Wash & Cure 3.0 Plus, has a few changes: lt is recommended to dispose or replace the solvent after washing 30 models to ensure the washing effect. In curing mode, the device pauses automatically when the cover is removed. This protects the human body from damage caused by UV light. Though not essential, some of the best wash and cure stations come equipped with a mount that can hold the resin printer’s build plate. This means there’s no need to remove the print from the build surface before post-processing, a convenience feature that makes manipulating the print a little easier.As for compatibility, the Prusa CW1S is chiefly designed for Prusa’s own resin printer, the SL1S, but the company has made it so that it’s compatible with prints coming off of all other resin printers on the market. It offers a 240 x 160 x 200 mm washing volume alongside a 200 x 300 mm curing capacity. This is sufficient for small resin prints, of course, but also larger figurines that stretch horizontally. It’s larger on all axes than any other stations on our list except for Mercury X’s towering 255 mm height. When cleaning the model, it’s important to have UV lighting shining on all sides of the model. The Wash and Cure Plus has a large metallic pillar which LED lights right to the top of the machine. The last 8 cm of the LED pillar can be angled down at a 45-degree angle to help with curing the top sides of the print. Expensive: it’s great if you have the budget, but if you’re trying to save, there are other options that are almost as good.