Coverage for Metallic Finish: Up to 2m²/litre. Coverage may vary depending upon method and rate of application and porosity of surface. Clean Up: Remove as much paint from brushes as possible before cleaning. Clean with a suitable brush cleaner or soak in white spirit for 5-10 minutes, rinse and dry thoroughly.

Drying Time: Touch dry in 4 hours. Handle after 8 hours. Apply a second coat after 16 hours (if necessary). Full hardness is achieved after 7 days. Ensure application conditions are favourable for painting, we recommend that the temperature is between 10⁰C - 32⁰C with a maximum humidity of 80%, do not apply in direct sunlight or if conditions are humid.Application: Stir thoroughly before use. Thinning is not required. Apply 1-2 coats with a brush or short pile mohair roller. For roller application lay off immediately with a brush. H222 Extremely flammable aerosol.H229 Pressurised container: may burst if heated.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H373 May cause damage to organs through prolonged or repeated exposure.H412 Harmful to aquatic life with long lasting effects. Preparation: Remove oil, grease, and all other surface contamination by cleaning with appropriate detergents. Remove loose rust by scraping and wire brushing or sanding. Lightly abrade UPVC, remove any dust and wipe with methylated spirit. Coverage for Matt/Satin/Gloss Finishes: Up to 10m²/litre. Coverage may vary depending upon method and rate of application and porosity of surface. Universal All Surface Paint is an advanced brush-applied paint and primer in one, designed for direct application to many surfaces. Can be applied directly to wood, metal, plastics, ceramics and more. Application - Stir thoroughly prior to use. Apply 1-2 coats of product with a suitable brush or roller. For best performance on non-ferrous or galvanised metals use Universal Special Metals Primer prior to application. For porous surfaces dilute first coat with 10% white spirit. Coverage - Up to 9m2/litre. Coverage may vary depending upon method and rate of application and porosity of surface.Drying Time - Touch dry in 2 hours. Handle after 8 hours. Apply a second coat after 16 hours if necessary. Full hardness after 7 days. Not recommended for application in damp conditions or if the temperature is below 10oC.

Limitations: Store in a dry, safe place. Do not store paint in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight. Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour / finish shown is for guidance only.