Sensky’s Motion Activated LED Strip Lights are perfect for closets and other applications where you don’t have easy access to a power outlet. You can pull off and charge the rechargeable battery unit that supplies power to these light strips whenever it runs down. The battery unit has a switch you can use to turn the lights on manually or set it to auto, and the light will turn on whenever it detects motion.

RGBIC (RGB + a built-in Independent Chip) strip light is a higher level of the RGB strip light. It has the same color options, over 16 million colors, like RGB and RGBW strip light. RGBIC LED strip lights' built-in independent chip could display a rainbow-like lighting effect. However, you won’t be able to leave it overnight for a nightlight, for example, as it will be way to bright. ConsThese strips use super bright 5050 LEDs, come with a power adapter, and include a remote that lets you set a specific color or access a handful of programs like flashing or gradually changing colors. You can’t control the strips with a phone app or your smart home speaker, and TJOY doesn’t provide some key information, like exactly how bright the strips are, but you have to expect some cut corners to get a value this good. These light strips come in a 9.8-foot length and put out more than enough brightness for mood lighting while being right on the edge for functional lighting. That means you’ll probably still have to rely on your traditional lighting in some situations, but you might be surprised at how little you reach for the light switch. On the other hand, the RGBIC Strips can’t be cut simply because they have an IC chip, and the lights will not work if you cut it. Both the RGB and RCBIV LED strips from Govee Smart Lights are exceptional and affordable products. However, they differ significantly, and both present their strengths. Keep in mind that both have their pros and cons, but that should not spot you from purchasing either. Especially because they are inexpensive.

To cut Govee Lights, you will need to make sure you have the right type of LED Strip. RGB LED Strips can be cut. This is because they do not contain an IC chip. Though bright, it is not as radiant as an RGBIC strip, which is not as potent and can light up a room way better. RGBICThe RGBIC is a new technology to display the colors and can make a room pop! One strip can be multiple colors and blend together. Pros There are many ways to operate an LED light strip after installation, so it’s good to give that some thought ahead of time. The most common options include strips with a physical switch, strips that operate via Wi-Fi or Bluetooth, motion-controlled strips, and physically wiring your LED light strips to a wall switch or dimmer.

Though the different colors in the RGBIC strip can be fun, it also means it cannot be cut. Therefore, it can be harder to install in walls in which you cannot utilize a clipping connector. The bottom line All thanks to the IC or Independent Control chip that gives you the power to display multiple colors in one light strip at the same time. And you can gain control of each segment’s color.You can hardwire LED light strips to a light switch, but it usually isn’t necessary. Most LED light strips run on 12 or 24 volts and use a power adapter that you plug into your wall outlet. “I suggest finding something either 12V or 24V, which is considered extra-low voltage,” says Belanger.