The GS-Tank Atomizer is small and powerful. It can hold 3ml of e-liquid and has a clear glass tank. The silver colored mouthpiece and adjustable air hole base perform well, and look good doing it. As air is fed through the atomizer’s s ix adjustable air holes from the bottom, it produces cool and flavorful vapor. Stainless steel threads and spring connector: It retains stainless steel threads for strong wear resistance and elastic spring connector for high adaptability. The battery, which is 2600mAh features two modes. The first mode is the TC, or Temperature Control mode. Having this mode selected means that the device will reach its desired temperature selected and will then stop itself from exceeding that temperature. The second mode puts the device in Variabe Wattage mode (VW). Having the device enabled in this mode ensures that the device has a greatly reduced risk of prematurely burning atomizer heads or producing dry hits.

eLeaf iStick TC40W – Gourmet E-Liquid eLeaf iStick TC40W – Gourmet E-Liquid

There’s one thing I really appreciate with Eleaf stuff, it lasts years and not only that, Eleaf continue to produce their models for years rather than releasing a new version every sixmonths.Ethically I think that’s a good thing as it produces less waste on resources in developing new stuff just for the sake of it, you also have more trust in Eleaf’s stuff as a result. As it comes with a Ni200 TC Atomizer head already installed, one can simply hold the central selection button down for five seconds and see TC Mode on the OLED. The temperature control allows you to set the maximum cut-off temperature. If you set it too low, the device will cease to vape. For instance, I usually keep it on 500˚F, and the temperature does not get over 390˚F providing a decent-sized, full capacity lung inhale. If you set the temperature to 350˚F, the device is will turn off in three seconds or so upon vaping because it is set too low.. It’s a toughie one to conclude, on the one hand it’s an old and basic mod with just a USB-C upgrade, but on the other hand it’s still a lovely little mod that remains timeless and still looks current.I thoroughly enjoyed using it as an MTL mod, and the 2600mAh battery lasted days at 11 watts.With the device turned on, press and hold the Up and Down Adjustment Buttons at the same time for 5 seconds. Eleafis a brand name of iSmoka Electronics Co., Ltd., established in 2008 in the city of Shenzhen. iSmoka prides themselves with innovative products and worldwide customer satisfaction via their participation with distributors’ customer recommendations. iSmoka maintains fans worldwide due to their long term commitment to the world of vaping by providing quality products and accessories. iSmoka’s dedication to their distributors stems from their wide range of OEM (Original Equipment Manufacturer) applications and services. By adjusting temperature in TC-Ni mode, you can enjoy different vaping experience at different temperature settings. It retains stainless steel threads for strong wear resistance and elastic spring connector for high adaptability.

eLeaf iStick TC40W – Royal Vapes

We were sent the mod only to review but there are kit versions that either includes a GS Air tank or just the mod with an eGo adaptor and cable. In typical VW mode, the OLED displays battery power, resistance, voltage and wattage clearly. You can see clearly battery power, resistance, wattage and temperature in innovative TC-Ni mode. VW Mode: The output wattage can be adjusted from 1W to 40W by pressing the up or down button, up to increase and down to decrease. The main body, top, and base plate are all metal, the body section is anodised aluminium while the top/bottom plates are chrome finished zinc alloy, and finally the control panel is plastic with metal buttons.

keep pressing up and down button simultaneously for two seconds when the battery if off, the screen display will rotate 180 degrees. You can see its old-school origins as it still has base air inlets for older bottom air fed tanks and RDAs, I still have a couple of old base air fed tanks but to be honest I no longer use them as tanks have progressed into much better options these days, but it’s there for those that need it. Ved at holde knappen som vender væk fra display og knappen som vender mod display imens batteriet er TÆNDT, kan du låse den således at du ikke kan justere på temperatur/watt The only update is that USB-C port instead of micro USB, the charge rate is still the same 1 Amp though and will take at least a couple of hours to charge, so there’s little benefit other than more compatible cables. Flexible airflow control ring: The amount of airflow can easily be adjusted by the control ring on the atomizer base so as to get different vaping experience.

iStick Lock - How To Unlock an Eleaf iStick (20w, 30w, TC40w) iStick Lock - How To Unlock an Eleaf iStick (20w, 30w, TC40w)

I’ve had one of these for a couple of years but it started to not hold a charge. Bought another to replace. Har du brug for hjælp eller mangler du hurtig svar på dit spørgsmål, så kontakt os endelig - Vores rare kundeservice er altid glade for at hjælpe! With temperature control function, it will consume much less battery power and e-liquid in TC mode than in VW mode. Adjust temperature: In TC-Ni mode, temperature can be adjusted from 100-315℃ or 200-600℉ by pressing the up or down button, up to increase and down to decrease. Long press up or down button can rapidly increase or decrease temperature setting.Tænd / sluk = Tryk på fire-knappen 5 gange. Hold knappen inde for at aktivere batteriet, således at du kan dampe på den. Stealth on/off: Press the fire button and down button simultaneously when the battery is on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button one time to see current setting. Large output and power capacity: Despite the small size, it can reach 40W output with 2600mAh power capacity. Protection: Bright OLED screen displaying all required vaping information, 10 Second Cut Off, Short Circuit Protection, Low Resistance Protection, Over-Charge Protection,

Eleaf 40W iStick TC40 Black Electronic Cigarette Temperature

The battery power indicator on the screen will keep flashing when the remaining power is less than 10%. It can be charged with the USB cable through the USB port at the bottom. It will take about 3.5 hours to get a full charge via 1A wall adapter With the device turned on, press and hold the Fire Button and the Down Adjustment Button at the same time for 5 seconds. The screen will display the message “Stealth Off”. Unfortunately Eleaf decided to leave the chipset exactly the same as the 2015 model, it’s very basic and only has a single Ni200 TC mode (Temperature Control), I’m a TC fan but I’ve never bought Ni200 wire as I mostly use SS316L and Ni80 so I was unable to try out the TC mode. The battery power indicator on the screen will keep flashing when the remaining power is less than 10%. It can be charged with the USB cable through the USB port at the bottom. It will take about 3.5 hours to get a full charge via 1A wall adapter. The battery indicator will keep flashing during charging and the screen will go out when fully charged. Vi har nemlig prismatch, så hvis du finder denne vare billigere et andet sted, kan du kontakte vores kundeservice angående prismatch.

I tried quite a few more 22mm tanks and they all seemed to suit it but a few left a small gap at the base.I don’t own a GS Air tank so I couldn’t try that. press the fire button and down button simultaneously when the battery is on to switch between Stealth on and Stealth off mode. In the Stealth on mode, you can vape with the OLED screen off and you can press the fire button one time to see current setting There’s not much point doing a ‘Performance’ section as it just performs as it should and I couldn’t test the TC mode, but knowing Eleaf, it should perform as intended. Conclusion The battery power indicator on the screen will flash when the remaining power level is less than 10%. It can be charged with the USB cable through the USB port on the bottom of the device. It will take about 3.5 hours to get a full charge via a 1A wall adapter. The battery indicator will keep flashing during charging and the screen will go out when fully charged. Switching between Temperature Control and Variable Wattage Modes Accurate reading of resistance: The reading of resistance becomes more accurate with the number down to the second decimal point.