Regulation 10 requires that, if the top storey of the building is above 11m in height (typically, a building of more than four storeys) the Responsible Person must:

Door Top Lock for 1 3/8 Safety Innovations Child Proof Deluxe Door Top Lock for 1 3/8

b. Letterboxes are firmly closed and not jammed open. Where a letterbox has been fitted to a door that did not previously have one, the resident will need to confirm that the new letterbox is suitable for use in fire-resisting doors and has been fitted by a specialist contractor. In both cases, the door should fully close into the frame, overcoming the resistance of any latch or friction with the floor. Bob Vila has been America’s Handyman since 1979. As the host of beloved and groundbreaking TV series including “This Old House” and “Bob Vila’s Home Again,” he popularized and became synonymous with “do-it-yourself” home improvement. damage or defects that might affect the door’s ability to resist the spread of fire or smoke (see 6.7 a-e)

e. There are no obvious defects in the hinges (for example missing or loose screws), or any other element of the ironmongery (for example ventilation grilles).

Door Locks of 2023 - Top Picks by Bob Vila The Best Door Locks of 2023 - Top Picks by Bob Vila

Responsible Persons, including both building owners (for example freeholders) and other persons having control of the premises (for example managing agents) were required to comply with the regulations from 23 January 2023. Any breach of the regulations is a criminal offence if the breach places one or more relevant persons (for example residents, staff or visitors) at risk of death or serious injury in the event of fire. 2. About this guide doors to stairways and lobbies (between corridors and stairways): these keep the stairways and lobbies free from fire and smoke, so that they can safely be used by residents and others who might need to leave the building during a fire, and to assist firefighters during firefighting operations

Find a Locksmith

d. The condition of the fire-resisting glass and glazing system in the door panels, and any associated side or over panels forming part of the doorset, retains their ability to resist the spread of fire and smoke. As this is a legal requirement under Article 9 of the FSO, you should have already made sure that a suitable and sufficient fire risk assessment has been carried out; if there is no fire risk assessment in place, you must arrange for this to be carried out as soon as is practicably possible. doors that sub-divide corridors: these are to limit the spread of fire and smoke throughout, for example, a long corridor g. The gap between the door and the frame is not too large. The industry standard is that the gap size should never be more than 4mm, except at the bottom of the door, where the gap should be as small as practicable, while ensuring that the door is unlikely to snag on the floor even if the door drops slightly on the hinges. Simple “gap tester” cards are available for this purpose.