Whether you are already an expert or just starting out with 3D printing, this fantastic pen is a fantastic tool for crafters, or technical types who need to build prototypes. With 3 speed settings, 'Rapid' which is great for larger creations, 'Fine', which is optimised for creating more detailed designs or drawing vertically, or 'Normal' speed which provides a comfortable level of output ensuring ease of use from the outset, as well as a steady continuity, minimising the need for constant start stopping. Once you’ve mastered the art of making your own candies using templates, why not take your creativity to the next level and start trying to create your own designs? This brilliant pen, which is suitable for everyone over 14, lets you easily create 3D drawings and structures. It comes with an app called the Trace App, which lets you create stencils from photos on your smartphone. Just put the included Screen Protector over your phone’s screen and trace over the stencils to create fantastic 3D designs!

Next, make sure that your filament is inserted correctly into the pen. If you already have filament loaded please unload completely from the pen (by pressing and holding the Power button for a couple of seconds and waiting for the filament to be completely retracted). Once removed, please ensure that the end of the filament is flat across the end (cut carefully with scissors if not) before re-inserting into the Loading Point in the top of the pen (next to where the power cable is inserted).To load new filament, firstly make sure the pen is turned on and the LED light is blue. Then place the filament into the loading hole at the top of the pen (the one next to where the power cable is inserted). Make sure the end of the filament is flat across the end before inserting (cut carefully with scissors if not). Insert the filament gently until it reaches the stop. Then simply press the Print button once and you will feel the filament being gently guided into the pen. This process will then continue automatically. Wait for the filament to be pulled all the way through the pen until you see it appear from the end of the nozzle. You can speed up this process by pressing the + button. If you have confirmed that you are using the correct power supply and the pen is still not working, please try using an alternative power source (power bank, USB power adapter etc.) to ensure that this isn’t the cause of the challenge. If you’ve managed to get to grips with the above techniques, why not become an expert Candy maker, by using the CandyPlay Pen to create three-dimensional models, treats or gifts! In testing, I did a few 3D constructions, but mostly drew some free-form objects or traced patterns on stencil. My experience was quite enjoyable, and the pen was easy enough to control, although I never did quite master changing the extrusion speed. Artistically, I would classify myself as a doodler, and the Play lent itself to this form of unguided creation. Good, Messy Fun Note: The 3D Pen is not a toy and gets very hot during use. For your safety, please do not touch the tip of the pen, the area around it, or the melted filament as this could result in a serious burn.

With the Play pen, you can even draw in three dimensions. To do that, you set the pen at its slowest extrusion speed, draw a small circle on a surface to act as a base, and then slowly bring the pen upward, keeping the filament taut, and it will harden even as you draw. In this manner, you can connect elements, draw spirals, and more. You can also make a three-dimensional object by creating two-dimensional objects (say, the sides of a building) and then “welding” them together by extruding hot plastic along the seam while keeping it at the proper angle. If you are trying to load or unload filament and this is taking some time then you can speed up this process by pressing the ‘Speed Control’ button, until 3 green LED lights are showing indicating the extrusion speed is set to rapid. You don’t need to be an experienced sweet maker to start creating your own unique Candy! Simply follow the steps below to create tasty, stunning creations that will wow family, friends and colleagues! For best results, draw directly onto If you are trying to load or unload filament and this is taking some time then you can speed up this process by pressing the + button.

Limitless Possibilities and Simple to Use

Please re-load the filament by simply pressing the Print button once and you will feel the filament being gently guided into the pen automatically (you can increase the speed at which the filament is pulled through by pressing the + button). This time, gently apply a small amount of pressure by pushing the filament slightly as it feeds into the top of the pen. Wait for the filament to be pulled all the way through the pen and this time you should see it appear through the end of the nozzle and the pen will be ready to use. simply place underneath a standard sheet of greaseproof paper or baking paper/parchment paper and trace your design to easily create your very own edible Candies.