Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna Detailed Channels and Maximum Power Settings for Cisco Catalyst 9120AXP Indoor Access Points, Release 17.3.5 17-Nov-2022 (XLSX - 9 MB) A new power savings mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point. This offers significant energy savings for battery-operated devices, up to three to four times greater compared to 802.11n and 802.11ac. Spatial Reuse (also known as Basic Service Set (BSS) coloring) which allows APs and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions. To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to https://www.cisco.com/go/DirTAC.

Installations in Intermediate Distribution Frame (IDF) closets (telecommunications or other electrical equipment) EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2) The emerging IEEE 802.11ax standard, also known as High-Efficiency-Wireless (HEW) or WiFi 6, builds on 802.11ac (WiFi 5). It will deliver a better experience in typical environments and more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. 802.11ax (WiFi 6) is designed to use both the 2.4-Ghz and 5-GHz bands, unlike the 802.11ac (WiFi 5) standard.

SD-Access enables policy-based automation from edge to cloud with foundational capabilities using controller-based architecture, including design with validated templates, simplified device deployment, unified management of wired and wireless, network virtualization with segmentation, group-based policies, and context-based analytics. Cisco does not represent, warrant, or guarantee that it is complete, accurate, or up to date. This information is subject to change without notice. The Catalyst 9124AXD access point has four internal directional dual-band (2.4- and 5-GHz) antennas that reside under a sealed radome and cannot be accessed. Cisco Embedded Wireless Controller on Catalyst Access Points: Indoor environments, with internal antennas Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List. Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. The Cisco Catalyst 9105 Series Access Points come with a limited lifetime warranty that provides full warranty coverage of the hardware for as long as the original end user continues to own or use the product. The warranty includes 10-day advance hardware replacement and ensures that software media are defect-free for 90 days. For more details, visit https://www.cisco.com/go/warranty.The custom solution starts with the Cisco SAgE hardware core, which has been integrated directly into the Cisco RF ASIC custom silicon. The SAgE core handles very compute-intensive operations, such as high-resolution Fast Fourier Transform (FFT) and pulse detection operations. (A pulse is a burst of RF energy in frequency and time.) The SAgE core has a highly granular spectral resolution of 78.125 kHz (4x better than the nearest competitive solution and 64x better than most chipsets). See the deployment guide at the following URL: https://www.cisco.com/c/dam/en/us/td/docs/solutions/Verticals/Education/SRA_Schools/schoolSRA_wlan_sba.pdf Whenever practical or possible, please keep antenna cable runs as short as possible. Cisco offers Low Loss (LL) and ultralow loss (ULL) cables, which have the same characteristics as Times Microwave LMR-400 and LMR-600. Managing dual 5-GHz cells is one of the most important things that FRA does. There are two modes of operation for dual 5-GHz APs: