If the appliance shows 60 Hz, then this appliance is not suitable for use within the UK. If the appliance shows 50–60 Hz it is suitable for the dual use (Europe/UK).

The standard blade fuse (also known as APR, ATC or ATO fuses) is the most common with many cars now using the mini blade version (also known as APM or ATM fuses). Increasing in popularity is the micro blade version (also known as APS or ATT fuses) with more widespread use expected in the future as manufacturers attempt to fit more electrical systems into the same spaceSwitch fuse units distribute current while shielding cables and devices from the damage that would be caused by power fluctuations along a particular electrical circuit. Switch fuse units are used in industrial and commercial buildings as well as domestic properties. Surface mount devices (SMDs) are electrical components that sit on the surface of printed circuit boards (PCBs). SMD fuses are available in both resettable and non-resettable forms.

Most UK plugs are fitted with a 3 amp or 13 amp fuse. 3 amp fuses are used with a range of lower power domestic goods and tools, including lamps, TVs, and drills. Meanwhile, higher power goods such as washing machines, kettles and toasters normally require a 13 amp fuse. What Happens When a Fuse Blows? Generally in this instance you will be having a 13 amp fuse in the fuse spur, feeding down to a 13 amp fuse in your plug,. Kettles have a wide range of wattages depending on if it is a slow boiling kettle, or a rapid boiling kettle.

You can use Ohm's Law to calculate the required rating for a fuse. Divide the power of the attached device (measured in watts) by the voltage of the power supply. If the result is a fraction, round this up or down. Slow Acting fuses include a delay mechanism that allows short, lower power electrical surges to pass through the circuit without the fuse blowing. They are also known as Slow Blow or Time Delay fuses. Dual Element fuses feature a higher performance delay mechanism

Obtain the tools you will need - typically fuse wire, wire cutters, a screwdriver and a torch so you can see what you are doing We will explain the different car fuse types further on in this guide, but the specific type of fuse your car needs will depend on a selection of factors. This includes the make and model of the vehicle, the existing fuse, and the electrical circuit or equipment it is designed to protect. Fast Acting Fuses: these are a more general-purpose fuse typically used with cabling and sturdier components. They are also known as Fast Blow or F-Type fuses If the fuse is working correctly, this means the problem does not lie with the fuse. If the fuse has blown or is not working correctly, it will need to be replaced The rating of fuse fitted within a plug depends on the power rating of the device to which it is attached. The fuse must be compatible with currents slightly higher than those used to operate the device.

The calculation would be 2200 Watts divided by 240 Volts equalling 9.17 A +10% which equals 10.087 amp. So from this calculation the ideal fuse would be a fuse of around 10 A amp. There are multiple different types of automotive fuses. Varying types and sizes will be needed for dealing with specific electrical equipment within the vehicle. For this reason, it is common for a single car to include many different types of fuses. AC fuses are specifically designed for use with alternating current circuits. They are more resistant to electric arcs when the fuse blows than DC fuses and more compatible with standard voltage power supplies. They can usually cope with higher voltages, too. DC Fuses