For those looking for a sleek, simple and modern cable to adapt SATA drives to USB-C, the Cable Matters is a prime choice. While it does have some minor compatibility issues with Mac and the length is quite short, most users shouldn’t run into any issues using it. USB to SATA Adapters FAQs

UASP (USB Attached SCSI Protocol) is a protocol that allows for faster data transfer between a USB-connected storage device and a computer. It’s important for USB to SATA adapters because it significantly increases transfer speeds, especially for SSDs. Ensure that both the adapter and your computer’s USB port support UASP to take full advantage of its speed benefits. Our test involved using the adapter to upgrade a laptop with a new SSD. The process was surprisingly straightforward. We connected the SSD to the adapter and then plugged it into the laptop’s USB-C port. The adapter’s very short 10-inch length was just right for our setup, keeping things neat without too much excess cable. The Vantec adapter is powered by an Innostor Technology Corporation IS611 USB 3.0 single chip SATA/PATA combo bridge controller.The Pro Converter has the ability to retrieve files from old Windows hard drives on Macs and Linux computers, and vice versa. The difficulty curve is well set. The first world, Factory, gives you just enough breathing room for error, despite still being quite challenging to obtain high ranks. World two, Temple, and world three, Jungle, are much harder to overcome. One of Little Triangle’s most alluring aspects is that it never becomes repetitive, thanks to the breath of fresh air that each and every level presents. Regardless of the few annoyances, stepping into new levels constantly brought interesting and exciting platforming. I have to hand it to Dreamoji, they’ve done an excellent job as far as diverse level structure is concerned. The theme of each world remains the same throughout its many levels, but Dreamoji’s clever implementation of new mechanics and obstacles helps to keep the each stage unique.

Supporting 2.5 “/3.5″ SATA HDD and SSD; 2.5″/3.5” IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical, and Blu-ray Drive. Hooking everything is easy and we tried out the Vantec IDE/SATA to USB 3.0 adapter on dozens of old hard drives and optical drives and found that it worked perfectly on all of them. In the image above we took an older Seagate 3.5″ PATA (IDE) hard drive and connected it to our Intel Ultrabook to retrieve some old files that we were looking for. The adapter itself is tiny, but you have to plug in the power source and then connect it to your PC, so there are several wires that need to be connected. No big deal, but don’t expect to move about! Overall, all these scores for www.little-triangle.com are consistent, so there is some medium-risk involved. Therefore, caution is advised if you're about to engage. Yes, you can use a USB to SATA adapter to clone your hard drive. Connect the target drive to your computer using the adapter, and use cloning software to copy the contents of the existing drive to the new one. This is a common way to upgrade a laptop or desktop drive to a larger capacity or to an SSD.The Pro Converter is an affordable solution to the problem of bridging the gap between newer and older motherboard interfaces.