Kanto YU6 จะเน้นย่านเบสต้นที่มีอิมแพ็ก แต่แฝงความนุ่มนวล ไม่ถึงกับคมชัดจะแจ้ง และจะมีการจางหายหรือโรลออฟของย่านเบสต่ำ ๆ ค่อนข้างเร็ว เรียกว่ามีเบสให้ฟังแนวเพลงทั่วไปไม่ขาดแคลน ยกเว้นจะฟังเพลงที่มีโน้ตเบสต่ำลึกถึงจะรู้สึกได้ว่าเบสจางหายไปเร็วหน่อย ข้อดีคือทำให้การปรับ EQ ชดเชยย่านเบส ทั้งที่ตัวลำโพงหรือแหล่งโปรแกรม หรือการวางชิดผนังด้านหลัง จะไม่กระทบกับความกลมกลืนของเสียงโดยรวมมากนัก

Audioengine A5+ 150W Bluetooth Speakers for Home, Studio, Gaming with aptX-HD, Wireless Computer... Kanto TUKW Powered Speaker with Headphone Out | Built-in USB DAC | Dedicated RCA with Phono Pre-amp... Is it the most critical or accurate loudspeaker on the market today? No, not by a long shot. Is it going to beat the likes of Sonos when comes to being the centerpiece of a DIY distributed audio setup? No. The YU6 is for enthusiasts, not 'philes. It's for someone that wants quality sound without all the fuss. The YU6 is a true lifestyle product in every sense of the word. You don't have to approach this setup with any reverence or magic pixie dust; you just need to put on a record or cue up a movie and enjoy. As far as I'm concerned, the YU6/ Sub 8 combo is one of the best gateway audio systems I have ever seen or heard.

Features

A watt is defined as a measurement of power consumption. When an amplifier processes sound, the output is measured in watts and consequently details the amount of power that the amplifier consumes. In the past, it was believed that ‘the greater the wattage, the more powerful the amplifier, and the louder the sound.’ Kanto YU6 โดยต่อใช้งานช่องอินพุต RCA โดยเลือกสวิตช์ด้านหลังลำโพงไปที่ Phono เพื่อใช้งานกับเครื่องเล่นแผ่นเสียง ความประทับใจแรกที่รู้สึกได้คือ ภาคปรีโฟโนในตัวลำโพงค่อนข้างเงียบ มี noise ในระดับต่ำ ไม่มีเสียงฮัมน่ารำคาญหู แต่ส่วนหนึ่งอาจเป็นเพราะปรีโฟโนในตัวลำโพงรุ่นนี้มีเกนขยายค่อนข้างต่ำด้วย Gold-plated binding post speaker terminals (16-foot speaker wire included to connect left and right speaker) Powered speakers work right out of the box and offer just the right amount of power. The premise behind this is that amplifiers can sometimes be complicated to set up, especially dialing in the correct power rating. If you have little to no experience in this field, a powered speaker comes organized without the hassle and speculation in the assembly process.

Most powered speakers nowadays come with built-in Digital Signal Processors (DSP). These specialized microprocessor chips take audio that has been digitized and manipulates them to improve sound quality. DSP is regarded as far more precise and accurate than raw or unprocessed audio and will usually perform better overall in comparison. I utilized the YU6 and SUB8 in each of the aforementioned configurations and found the system's sound to be, more or less, the same regardless of how I chose to enjoy the speakers, so what follows will be a summation of the YU6 and SUB8's sound overall, unless otherwise specified. Also, while the YU6 may be versatile and stylish, proper speaker and subwoofer placement is still important to extract the most performance from them, or any speaker--powered or passive.The Fluance Ai60 bookshelf speakers offer a lovely dark design and in terms of aesthetics would fit in nicely with a modern setup. Audioengine has been around for over 15 years and has made waves in the audio industry, popular throughout Europe and the United States. With years of experience, they are always willing to try new things, and one of their latest projects is the Audioengine A5+ Bluetooth speaker. Its amplifier is class AB, which offers good efficiency (78.5% efficiency at best and typically closer to 50%)) but not the best. When Should You Go for Kanto YU6? That being said, there are a wide variety of connections on these speakers and there should be something for everyone. Design

Input impedance is another critical specification that should be given importance. Your speaker should neither have high nor low impedance, 6-8 ohms impedance rating is viewed as ideal. The speaker that has high impedance needs more current, and the sound becomes weaker when the required impedance is not found. When deciding on the size of the speaker you require, there are four main categories to consider. 8-inches; 10-inches; 12-inches; and 15-inches. Now hold up; these category sizes are not relaying the actual size of the cabinet. These dimensions relate to the size of the woofer within the speaker, also known as the low-frequency driver. Low-frequency drivers produce bass, and more often than not, the larger the woofer, the louder the low-frequency response. But if you’re not a bass-head enthusiast, what does this mean for mid to high frequencies? There can be a few issues around getting Bluetooth devices paired correctly. You might find that it takes a few attempts to get this set up but overall it shouldn’t be too difficult.Bluetooth isn’t the only way in which you can set up and get sound from the Kanto YU6 speakers. It also features a variety of other connections. Total Harmonic Distortion is a factor in measuring overall Harmonic Distortion in a sound or a signal of a speaker. Low THD means higher efficiency, and it should be kept under 0.1%. The speakers we are talking about today have low THD, less than 0.1%. What Aspects Should You Consider Before Buying A Speaker? The peak power means the utmost power level that the speaker is capable of utilizing in short bursts. And RMS means the power an amplifier can put out over a long period. These terms are both equally important as the higher the power, the louder and more precise the speakers, although 60W peak power is quite efficient. Both RMS and Peak Power differ between those speakers. Inputs The other issue for the Kanto is the Bluetooth implementation. In recent years, we’ve become used to this being a reliably stable wireless connection that’s capable of delivering decent sound quality, but the YU6 feels a little underwhelming. It is reluctant to connect to both an Essential PH-1 and iPad Pro, and the performance is periodically affected by stutters and drop outs. I’m not sure why this is the case, but reboots and re-pairing don’t seem to completely eliminate it, which is disappointing given expectations with this kind of connectivity.