Because of where wheels are located on a car, they are subjected to a lot of dirt and grime. Not only are they battered the elements such and mud and dirt from the road, they are also subjected to brake dust and contamination from your brakes when slowing down. All of this nasty stuff means that a traditional car shampoo and wash mitt are generally not strong enough to clean your wheels properly, this is where a dedicated wheel cleaner comes in. pH Neutral: Essentially this means that it’s completely safe for use on your wheels and won’t inflict any damage to the metal. Gradually, brake discs and pads contaminate wheels (and paintwork) with iron deposits causing them to look dull and potentially causing damage over time. Using Dragon's Blood, you can remove all iron contamination from your wheels, paintwork, glass and more and restore the shine they once had. MIRCH Grime Off: Our flagship, best-selling, acid-free wheel cleaner that has the potential for agitation-free cleans. Simply spray onto a dry wheel and watch it pull the impurities off so you can easily spray them away. The product was then liberally sprayed onto the bodywork of the vehicle and began its process of dissolving over three months of grime, dirt, bird droppings and the like, effortlessly. The vehicle was once again rinsed with a hose to neutralise the solution and helped prep the car for the next stage of the detailing process, Snow Foam.

Once you’ve decided upon your wheel cleaner of choice, it’s time to get your wheels looking like new again. How Do I Clean My Wheels? We understand that some of the terms used may be new to you and mildly confusing, here’s a simple explanation of what they meanThe Gtechniq W6 is one of the brand’s most rated products and for good reason too. Not only does it offer outstanding value for the money but its also highly effective at removing stubborn iron contamination. The Auto Finesse Iron Out is another popular fallout remover that’s effective on both the paintwork and wheels. It’s designed and developed by professional detailers and it’s completely safe to use with a pH neutral formula. Dragon Blood is safe on most wheel types, however we always suggest doing a small test patch when trying on a new wheel surface. While these products have been extensively tested in a variety of different scenarios there are a multitude of wheel finishes used in the aftermarket and OEM* Any ideas on which fallout remover to go for? Been looking at something called aliens blood, trolls breath by proclean, as well as one called gtechniq w6? Pressure wash entire wheel, ensuring you wash away all residue and hit all hidden corners, especially those down low to completely clean surfaces.

If your wheels have a chrome or anodised finish, steer clear of acidic cleaners and go for products with a pH-neutral or alkaline formula. In all cases, avoid spraying wheel cleaner on the car's bodywork or your hands. If it gets into your eyes, rinse them thoroughly with water and seek medical treatment immediately. How do I protect my wheels after I've cleaned them? If needed, agitate the surface with a soft wheel brush before rinsing the formula away with water (or wiping it away if using a waterless cleaner). The result should be sparkling alloys you can be proud of. Now you just need to clean the rest of the car. Which alloy wheel cleaner should you buy? Working from the top of the wheel downwards, begin spraying on your wheel cleaner being sure to follow the manufacturer instructions. Don’t be too worried about using too much wheel cleaner, ensure that all parts of the wheel have been sprayed. Allow to dwell on the surface for 5 minutes or so. Overall, the Purple Rain formula by Autobrite is a relatively affordable and effective fallout remover that won’t disappoint. It’s the third generation of the product and by far the best yet by the brand.

The end result was absolutely amazing and you can see from the photos that even the interior rim of the wheel has been cleaned effortlessly and they appear as good as new and in a showroom condition! These results were achieved in under ten minutes per wheel! Five minutes soaking, two to three minutes of agitation with a soft brush, and a rinse from the hose. The Car Gods 54 Fall Out Eliminator is a pH balanced and silicone free formula that’s suitable for use upon paint, metal, glass, plastic and other trim. The brand state that you simply need to apply a generous amount to the surface, allow 5 minutes for the formula to turn completely purple and then rinse clear. Begin thoroughly rinsing your wheels with a pressure washer. The aim here is to remove as much of the dirt and grime without touching the wheels. If you don’t have a pressure washer, you can do this part with a conventional hosepipe but it’ll be much less effective. To maintain the highest quality possible and to support Australian business, we produce, source and have all operations in Australia. Australian made is quality. As well as testing a range of products from the big detailing brands in the UK, we also based our recommendations upon plenty of research and a number of factors. The factors that we considered included their effectiveness, dwell time, ease of application, compatible surfaces, colour transformation and value for money. Conclusion

Unless you have a costly set of carbon-ceramic stoppers, this dust is mostly made up of iron – and the static charge it receives when heated makes it cling to wheels like chewing gum to a school desk. Baked-on brake dust can be difficult to remove, that's why you need a dedicated fallout remover to dissolve the iron particles so they can be washed away. The best alloy wheel cleaners at a glance: Completely clean your wheel trims and alloys with Dragon’s Blood Iron Contamination Remover – now available in this amazing-value 6L bundle. Budget: Prices vary widely, although you don’t need to spend a lot for good results. You simply need to find the best products. That work has gladly been done for you by us. So why exactly should you consider MIRCH while looking for the top car care products or Australian made car care products? Simply put, we have got everything you need for your vehicle. Plus, there might even be some items that can take your car maintenance game to the next level.Are your wheels chromed or anodised? If so, choose a pH-neutral product that won’t damage their delicate surface. Each cleaner advises what types of wheels they are suitable for.