Brush evenly in the direction of the grain and apply the second coat once the first has been absorbed. Cuprinol UV Guard Decking Oil can be spray applied using Cuprinol Spray and Brush or other compatible garden pump sprayer.

Do not apply in temperatures below 5°C, in damp conditions or if rain is due before the product has dried. We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. So when it comes to building and home improvement, whether you are a large contractor, tradesman, self-builder, DIY enthusiast, or homeowner, we are confident that Haldane Fisher can supply everything you need. Unfortunately in the event you do not like the colour we are unable to accept the product back if they it has been opened.I bought Cuprinol UV Guard Natural Decking Oil for my new pergola in March, and applied two good coats. If the decking has been previously stained, painted or varnished, we recommend you strip it back to the bare wood.

Any over-spray should be cleaned up immediately (whilst still wet) with water and household detergent.For more information about how to use decking cleaners, how they remove treatments and are best to you use for preparation before applying decking oil, please check out our blog, Getting Your Decking Ready For Summer - Part 1: Clean and Revive.

We are predominantly a chain of timber and builders merchants supplying a huge range of products – everything from building materials to home improvement products such as bathrooms, doors, and floors. Our brands include Plumbmaster - Plumbing and Heating Merchants, BATHLINE - Bathrooms and Door Studio with dedicated facilities available across our branch network. Old coating type finishes such as decking paints, varnishes and varnish type stains must be fully removed back to bare wood before oiling. After almost nine months of successful collaboration, we're delighted to share some significant news with you.Cuprinol UV Guard Decking Oil (previously known as Cuprinol Decking Oil and Protector) is a premium water based decking treatment. The deck can be cleaned using the decking cleaner at regular intervals and if the surface is beginning to look tired or if water no longer beads on the surface a fresh coat of oil can be applied. To maintain the surface finish and its protective properties, re-apply a fresh coat of Cuprinol UV Guard Decking Oil as required, following the Preparation and Application instructions above. For all bare wood decking including tanalised, pressure treated and preservative impregnated decking timbers.