HINT: BE CAREFULwhen removing the flush valve from the basket as your flush valve may have gone a little brittle over time and we have known instances of the clips on the basket breaking off and it is then not useable. Please note: These delivery times are approximate and are only to be used as a guide. Delivery times may be longer or shorter than what is displayed due to factors outside of our control.

The Ideal Standard SV01967 Dual Flush Valve Seal is a genuine Ideal Standard product, covered by a manufacturer's guarantee. Ideal Standard flush valve won't seal properly and is constantly passing water into the toilet pan but there is no sign of an inlet valve failure, it could very well be that the base sealing washer needs to be changed. What is the outside diameter of the Valve seal rubber?, I am looking for replacements for an outside diameter of approx 61mm.NOTE: Replacing the diaphragm may not always resolve your problem as the fault could be with the valve itself but it is a cheap way to try and resolve and is usually successful. We also recommend washing your valve in warm water to ensure any limescale or grit which could be causing an issue is eliminated. Conceala 2 universal height, bottom inlet cistern - pneumatic single flush valve - no flushplate - 6 litre flush

Many make the mistake of purchasing a full replacement flush valve at the first sign of any issue, replacing just this washer may save you a lot time and money in the long-term. The flush valve in my toilet wasn’t making a proper seal so water from the cistern was constantly running into the pan...expensive if you’re on a meter like me. Apply downward pressure whilst turning valve, (to prevent clips breaking). Lifting the valve body exposes the valve seal.Fits multiple Ideal Standard & Armitage Shanks flush valves including SV89067 SV92667 SV92467 SV93467