Access must be suitable for lorries which will be 3.5 tonne 7.5 tonne or 14 tonne lorries (7.5 tonne being similar to average refuse collection lorry) In this post we will deal with the first, and in the following two posts we will look at the others – got it? Unlike other species, Yellow Balau has no specific ‘grading rule book’ and generally is sourced on the trust basis that certain mills produce a superior production selecting out lower grade boards for other uses. We use our considerable experience to source from the best shippers and to the specification that we believe is the best in the UK.

Clean the surface with Net-Trol and allow it to dry. Re-apply Textrol HES as directed under ‘Application’. Cleaning with Net-Trol once a year between treatments to remove dirt and other surface contamination will renew the appearance of the finish and wood. Clean Up Clear is the perfect solution where a totally natural look is desired. Redwood Tone is the ideal colour for enhancing the natural redness and characteristics of woods such as Ipe, Balau and Mahogany while Cedar Tone works wonders on Iroko and other similar light-coloured timbers.Maintenance applications may be required approximately once every 2 years depending on wood species, age of wood at time of initial application e.g. new or weathered and colour used. After cleaning and/or stripping, allow the wood to dry for 2-3 good drying days or until it has reached a moisture content of 18% or less before applying the finish. When first applied, Textrol will give the wood a rich, matt colour which will gradually lighten over time to the finished look. It is now available in 4 different colours for a range of looks all with premium protection. Why should I use Textrol? Shake or stir can well before use. Use as is. Do not dilute. Apply 1st coat of Owatrol Textrol and allow to penetrate into the wood (15-30 minutes). Apply 2nd application and allow to penetrate into the wood (15-30 minutes). If required repeat this procedure until the wood is saturated i.e. will accept no more oil. Once the timber is saturated, brush out or wipe up any excess product that has not penetrated within 15-30 minutes of applying the last application to avoid shiny spots. Once the timber is saturated, brush out or wipe up any excess that has not penetrated to avoid shiny spots

This Owatrol Textrol Penetrating Oil will give your wood a very natural look. Textrol actually deeply seeps into the top of the wood and helps protect it from further weathering and from UV’s beaming down from the sun along with protecting it from moisture in the air. To apply Textrol to weathered wood first ensure the wood is fully dry (preferably allow 2-3 completely dry days after cleaning) although we know this can be difficult to guarantee with the British weather! You can use a brush, roller or garden sprayer to apply the Textrol and you should apply an initial coat and allow 15-30 minutes for it to be absorbed into the wood. The important thing to remember about Textrol is that it should be applied wet-on-wet which means that you should not allow the surface of the wood to dry between coats. This is because Textrol’s place is in the wood and not on top – if you allow it to dry then the Textrol which has been absorbed will prevent the new coat form penetrating the wood! The driver must have assistance to offload unless alternative arrangements made with our transport team Textrol may only be applied to bare wood surfaces or a weathered wood that was previously finished with Textrol. All other oils or sealers must be completely and thoroughly removed with a wood oil remover such as Owatrol’s Aquanett and then the surface must be cleaned and neutralized with Net-Trol before applying Textrol. If necessary sand the surface after cleaning and stripping (80 grit paper). After cleaning, allow the wood to dry for 2-3 days before finishing. Previously coated surfaces

Why should I use Textrol?

Shop item collections (treatments, fixings) these do not need to be pre-booked you can just turn up and pay in normal working hours. Textrol should be applied ‘wet-on-wet’ meaning that you should not allow it to dry in between coats SLVK certified. The SVLK assurance scheme is a mandatory system that requires all timber from state-owned and private forests in Indonesia to obtain verification of legality – as a guarantee that the timber originates from legal, sustainably-managed sources. Textrol HES is a single coat saturating oil, developed to penetrate deep into softwoods and European hardwoods. Textrol HES has enhanced UV protection and a high solids content that protects the wood against the vagaries of the weather and UV rays. Having a luxurious matt-sheen finish Textrol HES enhances the grain and natural beauty of the wood. Properties

Maintenance applications may be required approximately once every 2 years depending on the wood species, its age at the time of the initial application e.g. new or weathered and the colour used. Textrol HES will gradually lighten over time due to exposure to the sun and UV rays. Textrol Laboratories Inc.(formerly Textrol Inc.), is a world leader in Precision Yarn Tension Control Systems. Textrol Laboratories offers the most advanced Hysteresis Brakes and Permanent Magnet Brakes for tension control systems in the world. Our precision calibration methods give us the ability to build a world class Tension System for most of the Yarns, Strands, Ribbons, Etc. used in the industrial world. Textrol enhances the natural beauty of the wood whilst providing a mildew-resistant finish with exceptional and long-lasting protection from the effects of moisture, weathering, and UV rays. It is applied wet-on-wet which saves time as you don’t need to wait for coats to dry during application and the maintenance is easy with local touch-ups and no laborious sanding required! If you are looking for a finish that brings life to older wood and allows the wood to shine through then Textrol is perfect for doing just that. It is also great if you are looking for protection from the effects of moisture, UV rays and weathering.

Credit limit exceeded

However, if the doors have a previous finish on them, it will need to be removed before application of Net-Trol and a finishing product. If you are collecting timber products please collect at the time bookedi.e. 9am collection would be 9am > 9:45am, this helps us have the product ready for your slot and reduces customer congestion. Apply single coat Textrol HES with brush or roller in the direction of the grain making sure board is saturated NOTE: Owatrol Textrol is not a surface coating, its place is in the wood not on the surface. Owatrol Textrol protects by penetrating the wood, providing a rich matt finish.

Imagine your garden area and patio were made of wood and the view was just outstanding and you thoroughly loved to just sit outside and take it all in. Well when winter comes around and then repeats another cycle with winter and summer your area near the garden could take a big hit. You may find your patio is dirty. There is nothing to fret about though because there is still hope. All you have to do to fix the problems is get protective treatments that you apply to the area and weathered wood which will make the end result simply beautiful. Carefully prepare everything and it can be super easy. You need to clean the wood Use as is. Do not thin. Stir can well before and during application. Apply a single liberal application of Owatrol Textrol HES working in the direction of the grain. Millglaze is the compacted surface which occurs during the machining process. The heat from the cutters draws natural oil in the timber to the surface compacting the fibres and creating a hard slightly shiny surface which will prevent an oil finish from penetrating as intended. Treat new wood with Owatrol Seasonite and allow to weather for 12 months. Weathered Wood (Wood exposed to weathering for longer than 12 months) should be treated with Net-trol Wood Cleaner & Colour Restorer, following instructions on the container. Please consultManufacturers Product Data Sheetbefore application. Features To prepare your surfaces for the application of D1 you need to follow some simple instructions depending on whether your wood is new or you have allowed it to weather first. If your wood is new you should treat it with Aquanett wood oil remover (by simply applying and then brushing and rinsing) to help to remove the mill glaze which would prevent the D1 from penetrating the wood adequately. You should then neutralise the wood with Net-Trol and allow to dry fully before applying Deks Olje D1. If you are using weathered wood we would advise cleaning it with Net-Trol to remove any built-up dirt and restore the natural colour – especially as Deks Olje D1 is a clear finish so you really want to see that natural wood colour.PaintWell increased its Industrial Paints offering with the acquisition of Promain UK Limited, the preferred UK distributor for many of the world’s leading paint and surface coatings manufacturers.