The Record Doctor Vi is a handy vacuum system that efficiently cleans your records via its vacuum and solution system. While some aspects of the machine are manual, it also offers a deeper, suction clean that is not achievable through a more manual brush system. Once you’re done, it produces a completely dry record, so you can get straight to listening to your records. The machine is also affordable, easy to use, and incredibly low maintenance. Deliveries outside of the EU are not subject to 20% VAT and so the 20% tax on items is automatically deducted when you login or register.

Water Filter - A detachable water filter in the water tank gives an option to reuse the cleaning water. The filter is washable, which makes for easy maintenance. When that’s done, set the record spinning on the turntable. Step #2: Placing the Brush on the RecordI prefer doing it this way as sliding towards the center or edge of the record both drag whatever dirt has been collected by the brush across the record’s grooves. Step #4: Cleaning the Brush and Repeating Carbon fiber brushes are good at collecting dust, but not necessarily at retaining it, so this repetition is necessary to ensure you’re clearing the record of as much dirt as possible. A Step by Step Guide To Using a Velvet Brush for Vinyl Records

Read on four our full guide on how to use a record brush to its best effect. In this article we’ll cover why it’s important to use a brush on vinyl records, the different types of brush there are, as well as the steps to take when using each brush.Summary of the Audioquest Anti-Static Record Brush Enhance Your Vinyl Experience with the Audioquest Anti-Static Record Brush Whatever you choose, it is worth mentioning that you should stay away from using soap, detergent, and paper towels. Using these items to clean and wipe down your records is ill-advised because they can scratch and damage the surface of your vinyl.

To do this, we need a soft pad with fibers capable of getting into the groove as we clean the record in a circular motion. Now repeat steps 1-3 as many times as is necessary to get the record to a level of cleanliness that you’re satisfied with. Microfiber brushes can also be used with a small amount of cleaning solution for optimum results, and have similar results to velvet brushes. Combination Record Brushes Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface. G3 Fluid requires a rinsing step. Either use GrooveWasher's GSR Super Rinse Fluid, or distilled water.Here atLouder, we are music lovers and experts in our field, with many years of music listening and product testing between us. We live and breathe everything music related, and we draw on this knowledge and experience of using products when selecting the recommendations for our guides. Designed for use with the GrooveWasher cleaning pads. But you can use G2 Fluid with your preferred absorbent brush or fabric. NOTE: Carbon fiber brushes are non-absorbent and not designed for wet cleaning. Use of G2 Fluid with a carbon fiber brush is not recommended. You can repeat this whole process as many times as you feel is necessary, depending on the cleanliness and condition of the record. I like to do it twice, unless the record is particularly dirty, in which case I will keep repeating until I’m satisfied. Storing your vinyl properly is another way to keep the grime at bay for longer. When I'm not playing a record I keep it in a dust cover inside its sleeve and store it in a built-for-purpose vinyl storage unit that's in a cool dry place and away from direct sunlight. It’s also good to think of using a record brush as a light bit of maintenance work, but not as a full-on cleaning solution.