Once the straps were completely gone (after 30 minutes of my husband cursing with a screwdriver and hurting his delicate fingers), we took an old kitchen towel and wiped the entire crusty chair clean with warm water. Furthermore, it's important to mention that while the Tripp Trapp promotes independence by bringing children closer to the dining table, parental supervision is crucial at all times, especially for infants who are still developing head control. We hope these suggestions prove helpful and enhance your experience with our product. If you have any further questions or concerns, please do not hesitate to reach out to us. Start to disassemble the chair – it is enough to loosen all the screws so that nothing is tightened and the seat and foot plate can both be easily adjusted within the grooves. All the parts can remain intact, as nothing needs to be removed. The safety harness is meticulously designed to prioritise child's safety. While the straps may feel firm, this is to ensure sturdiness and protection. We do recommend adjusting the straps according to your child's size and needs. Ensuring a snug yet comfortable fit can greatly assist in preventing any unintended leaning.

The iconic Tripp Trapp® was the first chair of its kind when designed by Peter Opsvik in 1972. Its intelligent design grows with your child, providing a comfortable, ergonomic seat at any age. It has been made to fit right up to your dining table to bring your baby into the heart of your family, allowing your little boy or girl to eat, learn, play and develop alongside you. Turns your Tripp Trapp® Chair into a comfy and safe high chair. At around six to nine months, your baby will be able to start sitting upright unaided.• Transforms Tripp Trapp® into a comfortable high chair In the meantime, I’m pregnant and looking for recommendations for a new high chair for Baby Girl. Please advise. Prevents your child from sliding between the Seating Rail and the Tripp Trapp® seat plate, reducing the risk of your child sliding out of the Tripp Trapp®.If there is still a light wobble, it is commonly a result of overtightening the floor brace. As these are the first screws to fully be tightened, it is very easy to accidentally overtighten these screws. To eliminate this problem, simply loosen the floor brace by half a turn on both sides. The chair should no longer be wobbly. We are sorry to see you are having issues with a wobbly Tripp Trapp. It should be noted that Tripp Trapp chairs can be assembled in a way that makes them wobbly and the utmost care must be taken when assembling the chair to avoid any such issues. Besides the visual guidelines provided within the User Guide, we ask that you try to reassemble the chair with a set of specific guidelines in an effort to resolve the issues you are facing. Doing so would spare you the time it would take for a new set of legs to arrive, as reassembly is an inevitable part of the solution. Additionally, in case the chair is not assembled in accordance with the guidelines, the wobbling issue would present itself even with a brand new set of legs. The Tripp Trapp® Baby Set provides optimal sitting safety during your child's first months and years, and continues until the time when your child is able to climb in and out of their chair independently. The Stokke® Tripp Trapp® chair has been designed for use at tables with a standard height, i.e. between 72 and 76 cm. It is therefore not suitable for use at bar tables. This is the way Peter Opsvik has intended the chair to be used for adults, since he invented Tripp Trapp in 1972.

You will be able to remove the shoulder and side straps of the Harness from the Baby set as per the user guide. The only part that is fully integrated and not removable from the Baby set is the crotch strap. I put my entire Tripp Trapp in the shower and just used hot water and a little dish soap on it. It worked like a charm!”The Tripp Trapp® Baby Set provides you and your child with a number of features, functions, and benefits. Ensure that you have assembled the floor brace the correct way so that the warning label is facing towards the rear of the chair. If you have attached the floor brace so that the warning label is facing downwards diagonally, remove it, turn it around and flip it so it looks as it does in the User Guide. Tighten the floor brace on both sides.

No, the Tray can only be used in conjunction with the Baby set. It cannot physically be attached directly to the Tripp Trapp®chair itself. But after a year with this stupid chair my husband and I wondered, “ Do other parents know something we don’t??”I love how easy it is to clean the chair at the end of the day. All I need to do is wipe it down with a clean damp cloth and it cleans up beautifully. The straps are not very easy to remove and clean but if they are really dirty I just fill a container with soapy water, set it on the seat of the Tripp Trapp and dangle the straps into it until they are totally clean. After that I pat-dry them with a towel and then let them dry overnight." Includes Tripp Trapp® Extended Gliders and integrated 5 point harness for extra stability and peace of mind. Comfort & Design• Your child can comfortably sit at the dining table and enjoy mealtimes with the rest of family.Classic, iconic design will never go out of style When used as a chair for adults (or teenagers) we recommend to:• Remove the seat plate and use the foot plate as seat plate, on groove 4. I found this equally ridiculous and brilliant. Ultimately decided against it because we didn’t want to ruin the wood in the shower.

Specially designed for children 6 months to 3 years, the baby set securely and comfortably brings your child to the table. Fits AU/US version Tripp Trapp® chairs produced after June 2013. User Guide

All this is to say, I suppose the Stokke Tripp Trapp High Chair was a good investment. Maybe. I’ll let you know how I feel about it in another year. Ensure the seat and foot plate are both flush. If either of the plates remain in the grooves of the leg crooked, it can cause one of the plates to be more loose than the other. The seat plate should not exceed more than 6-7cm in depth. If the seat plate is reaching too far outwards, it can cause problems with stability of the chair and also cause discomfort for children, whose thighs are not long enough to reach over the edge, which in turn can reduce blood circulation to their feet. Additionally, crooked plates can cause the assembled chair to emit creaking noises with any bit of weight placed on them. Provides increased support and stability. Brings your child forward in the seat and closer to you at the table.