It is important for the user to determine the suitability of the CUTEK® Wood Reviver for its intended application. ALWAYS test product on a small test area prior to applying to any large sections. As the species and condition of wood can vary significantly, testing will enable you to accurately estimate the dilution, time and volume of CUTEK® Wood Reviver required to complete your project.

Liquid Gold 250 ml Wood Reviver and Nourishing Oil House Mate Liquid Gold 250 ml Wood Reviver and Nourishing Oil

Rinse from the highest point and work down methodically using long even strokes in the direction of the grain, until there is minimal to no sudsing. The longer that CUTEK® Wood Reviver is left on the wood, the greater the rinse time required. Wet your wood prior to applying CUTEK® Wood Reviver. Apply CUTEK® Wood Reviver liberally to wetted wood with a brush, roller, broom or low-pressure garden sprayer.Before you begin to Prepare and Protect your wood, note the hazards and precautions and ensure that you have obtained and know how to use the correct safety equipment as detailed in the Safety Data Sheet. Note: certain types of wood surfaces may leave a raised grain effect after pressure washing is completed. Sanding or poly pad scrubbing may be required to smooth out this condition. Spreading rate is approximately 1 US gal of CUTEK® Wood Reviver per 200-350 ft2 of surface area to be restored.

Liquid Gold Wood Reviver Deals Up To 70% Off - Compare Liquid Gold Wood Reviver Deals Up To 70% Off - Compare

Rinse off thoroughly, using a pressure washer set to approximately 50 bar (750 p.s.i.) with a fan jet pattern. REMOVAL WITH A GARDEN HOSE IS NOT SUFFICIENT. CUTEK® Wood Reviver is a powerful timber restoring agent and can be used diluted or undiluted. Coverage can vary depending on the smoothness and density of your wood as well as the severity of staining and/or weathering. Always test to determine if your chosen dilution is effective in the restoration of your specific wood.

About Us

Let CUTEK® Wood Reviver do the work by leaving it on the surface for 1 hour to 24 hours depending on the severity of staining or discoloration. It may be necessary to scrub stubborn stains moderately with a stiff fiber brush.