To reduce the risk of injury, user must read the Product User manual, Laser Safety manual, and Battery Safety information. Slide the pins at the bottom of the battery door into the notches in the battery compartment (Figure E ). Switch the device on/off several times. If error still occurs, return device to Service Center or Distributor If INFO appears on the display window with a Code number, perform the corresponding Corrective Action. Code Once the current measurement is taken (the device is not in Continuous Measure mode), you can change the unit of measure from decimal ft (6.21 ft) to fractional ft (6'02"9/16), fractional ft to meters (1.894 m), meters to inches (74 9/16 in), or inches to decimal ft.

The tool will measure the distance from the bottom (Figure F ) or top (Figure F ) of the tool to the wall or object. NOTE: If Second measurement is larger than first: IC 601 will be displayed for a negative number. Please switch measurement points so first measurement is larger than second. Press the gear button (Figure A ) three times to show the indirect measurement height on the display window (Figure E ). Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)

Specification

If you need to measure the height of a tall object (e.g., a tall building), you can calculate the height based on the distances from the same point to 2 or 3 points on the object. The tool will use the Pythagorean Theorem (A2+B2=C2) to calculate the height. Measure a distance with two measurements Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice. For Further Information Point the laser at the top of the tool laser (Figure A ) toward the wall or object whose distance you need to measure. While the laser tool is in operation, be careful not to expose your eyes to the emitting laser beam (red light source). Exposure to a laser beam for an extended time period may be hazardous to your eyes. Do not look into the beam with optical aids. The following label information is placed on your laser tool to inform you of the laser class for your convenience and safety.

You can use the distance to two points on a tall object (Indirect Height) to determine its height (Figure I1). View the Volume measurement at the bottom of the display window (Figure C ). Measuring the Height of a Tall Object Press the gear button (Figure A ) three times to show pythagoras (Figure B ) on the display window.Position the tool at one end of the target and point the laser dot across the length. (Figure H ) shows where to position the tool if you are measuring from the top of the tool.) Should you find one day that your DeWALT product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.