Archived copy". Archived from the original on 2013-06-25 . Retrieved 2013-03-02. {{ cite web}}: CS1 maint: archived copy as title ( link), Tamper Resistant Receptacles, Electrical Safety Foundation International, 2009, (retrieved 1 March 2013 from ESFI) If the Machine does not require a Neutral it will only have 4 Wires. You can use a 5 Pin plug but the middle pin will be swaying in the breeze and will prevent you plugging it into a regular point in a building without 5 Pin outlets. We can make Phase Splitter Adapters to split 3 Phase to Single Phase - these are often used at events wheresingle phase is required.

In the Netherlands, Perilex is also used to connect fans with wired speed control (Switched L2 and L3 pins), but fans may not use three phase power Odom, W. (2004). Computer Networking First-step. Cisco Press. p.38. ISBN 9781587201011 . Retrieved 7 February 2016. History of the "California connector" used in mid-sized distros?". forums.prosoundweb.com . Retrieved 2016-12-22. lloyd-grossman-accent]Who would buy something like that to use in a rented house?[/lloyd-grossman-accent] The primary advantage of the stage pin connector over the NEMA5-15 connector (commonly known as an Edison connector in the theatre industry) is its increased durability and resistance to damage due to its more robust construction and the ability to compensate for wear with a pin splitter. Having a distinct connector designated for dimmable power also helps prevent confusion of dimmed and non-dimmed circuits which could lead to equipment damage. Even the smallest stage pin connectors are rated for 20A, which translates to 2.4kW at 120V, compared to the 15A and 1.8kW of the NEMA 5-15. In applications where cables are on the floor, the low profile of the connector allows for connections that are only slightly higher than the cables they connect.

Please note:

The answer is yes you can change out the plug to a different one however there are some rules around what one is the minimum Amp rating you can install IEC 60050 - International Electrotechnical Vocabulary - Details for IEV number 195-02-06: "neutral conductor" ". electropedia.org . Retrieved 30 July 2016. You might think this would give a total of 15A per phase but you would be wrong! because the two loads are drawing currents from the phase that are 60 degrees out of phase with each other and so partially cancel giving us 13A (you can treat a magnitude/phase pair as a 2D vector or a complex number for the purposes of adding them together).

It's 1.2m wide and deep, 2.4m tall, and takes 380kg of meat. I imagine all others of that sort of power will be similar. Så elsäkrar du ditt lantbruk (in swedish)". Swedish authority for electrical safety. Archived from the original on 2013-08-25 . Retrieved 2013-08-24. So if the OP's oven does take anything approaching 32A per phase it makes it even more odd - I just googled for commercial smoking ovens, and the first link I looked at was an Australian company, and they have a 21kW model. Some optional features displayed by certain models and makes of industrial power connector can include:

Freight AUS and NZ

Wecan manufacture step-down adaptorswith an in-line overload trip. These are normally called “ Cable Protectors” andare commonlyused topower catering trailers; yachtetc... Brands we work with to supply our 32A connector plugs include our own top value RS PRO line, as well as other trusted names including ABB, Bals, Legrand, Mennekes, and Merlin Gerin. What are 32 amp plugs used for? Now lets consider the case of a star connected load without neutral. It turns out the circuit will behave exactly the same as above, since there was no current in the neutral removing it will have no impact on the voltages in the system. Each of the loads will still have 230V RMS across it and they will still draw 3KW each for a total of 9KW If the Machine requires a Neutral it will have a cord on it with 5 wires, so use 5 pin plugs when this is the case.