Now, if you want your curtain to reach the floor, take note that it is not good that you choose a curtain that is too long. It makes the area even presentable, especially when the design and colour work well with the UK room. The first step when planning on how to make tabbed curtains is getting the materials ready. The following materials are what we use to make a tab curtain: Scissors, fabric material, measuring tape, thread, pins, measuring ruler, pen/pencil, sewing machine iron, and ironing board. Get them ready.

You may be guaranteed by the quality of the curtain you`ll buy, but you may be wasting so much money if it doesn`t even fit the size of your window. The problem is that you will need to wait because it will still be shipped, and you have to add extra pay. If you want it to be a little longer, you can use curtains measuring 20 cm below the windowsill from the rod. When you finished measuring the width and length of the fabric. The window width and span distance are measured. Step #4: Cut out the tab part region And then, you can also somehow adjust based on the budget you have. Isn`t it too much to spend a lot of money on curtains?

It is the most common mounting of curtains that we get to see in every home we go in – including ours. As these tabs are ready, get iron and press the material from the tip down the end to ensure proper fixing at the end of the process. Step #7: Arrange the Curtain Fabric with pins How to paint curtains? Well, it’s easy as 1-2-3! All you need to follow four simple steps, and you finished! There are so many ways to hang curtains, but the most common and the simplest way is to hang them using a rod. Measure the curtain length and the window length using a tape or any other distance measuring device. This measurement is critical when planning on how to make tabbed curtains. Step 3: Measure the window width and length distance

Fold the tab region after the cutout. Use a sewing machine to sew it together to avoid the threads from pulling out. It also makes the work very neat. Step #6: Iron the tab The fabric specifications depend on your preference. Step #2: Measure the Width and Length of the Fabric

Such a technique is practical since it can cover the whole window, protect the UK household from the outside light, and create an illusion of a more upscale look.

Many people in the UK prefer to use this on their projects because they can get any colour they like. In our research on the perfect camper curtains, we ran across a few products and ideas that we don’t have firsthand knowledge on, but thought worth mentioning: Just like an open tab, you follow similar steps in making hidden curtain tabs. The only difference is that you don`t cut out the tab. You cut pieces of fabrics you will use to form the pole hanger (tabs). Then multiply this number by 1.5. For the least width up to 3 for the maximum to determine the proper width of the curtain.Also, since you don`t mount the rod inside the window frame, you won’t get the frame damaged from the effects of drilling screws. Internal to the frame mounting But when you do have a lot of money, it is beautiful. After all, curtains are multi-use, which means you can use them in many ways. Making a drape with the top tab is very simple. Follow the steps outlined in the making of tab curtains. When buying fabrics for the drape in the UK, buy a length that will cover the floor length. As much as it matches the colour palette of your UK room, there will be no problem upon putting those on.

Determining the length of the curtains we’ll use will significantly affect how our UK home would look. Attaching to Headliner- You’ll sew the hook/scratchy side of velcro onto your fabric and attach that directly to the headliner around your window. Use lightweight fabric, as velcro to headliner isn’t as secure of a bond. Test beforehand to be sure it is good enough to hold up the weight of your fabric!

Spread a large portion of the fabric material that will cover the window on the floor. The tabs are left at the edge with pins and arranged accordingly. The proper arrangement will let the curtain rods fit in. Step #8: Sew the tabs together with the fabric material You can add a second or third layer of different colours over the first layer to achieve any desired effect. Like any other car covers, curtains designed to limit the amount of light that enters your vehicle. Or use magnets sewn into the hem of your curtain as shown in the image from vanspiration - Zach’s 2003 Chevrolet Express. You may find a magnetic surface like your window frame screw heads, or you could use adhesive magnets against your vehicle (linked in material list).