That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table. How to Program Hitachi TV Universal Remote With Code Search We have mentioned all the remote codes for this hitachi brand, we also mentioned the steps to program your device with the universal remote. So get the code for your device to press on your universal remote and then operate your favorite channel. Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off” We’ve sourced this remote control directly from Hitachi, and it’s supplied with a full 1-year warranty, with same day dispatch before 3PM.

This is a genuine, Hitachi branded remote control. This will usually appear and operate identically to the original remote supplied with the Hitachi RC43141. About the Hitachi RC43141 Original Remote Control Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored. In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below: This is an original remote control manufactured by Hitachi. It does not require any setup or programming, so you can pop in the batteries and continue using your Hitachi RC43141. Adjust the brightness of the Hitachi TV further by selecting the "Brightness" setting under the menu list.If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”) Change the colour temperature of your Hitachi TV. The colour temperature allows for a range of viewing styles, from natural colours to more artificially tweaked display settings. Choose the "Color Temperature" setting on your menu. Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program. Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment. The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions. Conclusion: Change the contrast level of the Hitachi TV to further set your colour preferences. Highlight and choose the "Contrast" selection on the menu. The Hitachi RC43141 remote control is a direct replacement for the original remote, and provides all the functions to control the device.