Applications：Can be used for woodworking,Quick Positioning for different thickness, easy to producing joints.

Jig for fitting Screwfix 34mm cam lock dowels and 15mm cam

Even with a properly-fitting screwdriver, sometimes the screwdriver socket will break, leaving bits of broken metal. The drill bit and drill ring are made of carbon steel, the positioner is made of aluminum, and the bag holder is rust-proof and durable. I was curious about cutting down a Pax into a sort of custom dresser, but I’m a little concerned that I’ll cut at a spot where the exposed top is a cardboard layer, which isn’t going to be substantial enough to affix the top to. For something like that I would get a basic carcass and use the cam lock section as a template to make the jig.Lastly, cam lock nuts are unattractive, and IKEA designers of course take pains to put them on the insides or undersides of surfaces.

Products — levoite

The end guide bushing directs your drill bit perfectly straight for the bolt hole and the side guide bushing does the same for the cross-dowel insertion hole. There is a post that screws into the flat side of the first surface and slides into a hole on the end of the second surface. I still use my pocket hole jig some because: I can not plan a complete project using only dowels and put it together like a puzzle.If it is solid and you can cut it without destroying it, I’d recommend good old fashioned dowel and glue. Fortunately they seem to hold well enough even if they don't quite work right, but they are unpleasant to work with and I would dearly love to see an alternative method in future versions of these furniture pieces.