Keep in mind, it all depends on what you’re trying to accomplish with your PC build. But if you plan on gaming, web browsing, school work, YouTube or nothing like streaming or 4k editing you should be just find. I did not test the system for 4k editing or streaming but I’m sure the PC would run hotter as those events add more stress to the PC. At the end of it all the Cooler Master NR200 is more than deserving of an Editor's Choice award. The NR200 is a solid case, not flimsy at all in construction. It's one of the easiest cases of its size to build it. There is more modularity to this case than even those twice it's size and I'm pretty sure I missed some features along the way. I didn't even get close to testing out every single configuration possible. Motherboard Size: Mini-ITX, Micro ATX, ATX | CPU Cooler Clearance: 73mm | GPU Clearance: 336mm | Fan Mounts: 2 x 120/140mm front; 1 x 120mm top | PSU Clearance: 170mm | Front I/O: 2 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2x2 Type-C | Size: 9.72" x 6.57" x 14.25" | Weight: 8.1 pounds GALAX GeForce RTX 4090 SG / GALAX GeForce RTX 4090 ST / KFA2 GeForce RTX 4090 SG (default adapter doesn't quite fit) Okay, I'll concede the drastically better thermals are due to having additional fans in the case, and the overall design of it, but they are what they are. The Cooler Master NR200 simply lends itself to cooler thermals due to the design and layout they implemented. You'll not have to be nearly as concerned with thermal limitations in this case as you would be in something like the Node 202 and it is smaller still than the H210i we recently reviewed while having similar, if not better compatibility and it was much easier to build in the NR200 over both. Conclusion

The Fractal Design Ridge channels the classic rectangular, sleek look of the Xbox and PlayStation, helping your PC fit right at home next to your gaming TV. This compact case is slightly cramped, as is to be expected, but ready to house up to four 2.5-inch SSDs or hard drives and a graphics card up to 325mm. You’ll only be able to fit an SFX or SFX-L power supply into this narrow case, though those small dimensions make it easier to grab and go places. Mini ITX cases are beloved because they allow you to build a much smaller gaming PC. Since lots of the bigger cases have so much empty space (which enables for build variety), this is a much more ‘optimal’ way to build.

When I first built the PC the temps were my biggest concerns especially for a SFF like this. However after tweaking and watching a few YouTube videos, I was able to get the i7-13700k under good temps. When I first stated I was getting 70-80c when gaming but nothing over 80c. You definitely need to undervolt the i7 it runs hot. To do this, you can simply go into your bios and if your motherboard supports it, use CPU lite load. It’s one of the easiest ways to undervolt. I think everyone starts at default(mode 9). The pc will most likely throttle when running stress test. Motherboard Size: ITX, DTX | CPU Cooler Clearance: 155mm | GPU Clearance: 330mm | Fan Mounts: 2 x 120mm (top), 2 x 120mm (bottom), 2 x 120/140mm (side), 1 x 92mm (rear) | PSU Clearance: 130mm SFX | Front I/O: 2 x USB 3.2 Gen 1, 3.5mm Headset, Power Button | Size: 14.17" x 7.28" x 10.78" | Weight: 10.1 pounds

I was worried that I might receive a dead AIO like some others reported, but mine is fine. I don't hear the pump unless I put my ear close to the case, and the fans are pretty quiet at 800rpm at idling temperatures. Power supply is also quiet and not really noticeable. This is definitely one of the quietest computers I've built. If there was anything negative to say is that it made me really reconsider my components used and wished I had gone for a much larger air cooler or even water cooling for the Ryzen 5 3600 we used, or even a bigger GPU since surely this case could easily dissipate the heat. Motherboard Size: mITX, mDTX | CPU Cooler Clearance: 165mm | GPU Clearance: 335mm, 3-slot | Fan Mounts: 1 x 180mm front (included); 2 x 120/140mm bottom; 1 x 120mm rear | PSU Clearance: 200mm | Front I/O: 1x USB 3.1 Gen 2 Type-C, 2x USB 3.0, 1 x Audio | Size: 16.42" x 8.74" x 14.72" | Weight: 12.8 pounds The Fractal Design Torrent Nano enables ITX builds closer to those of traditional mid-tower PC cases. That’s thanks to its larger-than-average size, making it easier to build in and allowing for more standard components. You can even squeeze in a 200mm ATX power supply and up to a triple-slot 335mm graphics card. It also features a unique front panel design and mesh throughout for ample airflow, while a side glass panel lets you show off components. SSUPD takes “mini” to another level with its Meshroom S case thanks to its tiny form factor. Given the case’s small footprint, you’re probably worried about heat dissipation, but every panel is mesh for optimal airflow and easily removable to add extra cooling. There’s even space for a 280mm radiator or two 240mm radiators, and you also get support for up to 73mm air coolers and space for some fans.All in all you can do this in a couple of hours tops. On youtube, Christopher Flannigan has a step by step NR200P MAX video which is very detailed and complete. I watched that and everything was crystal clear. Highly recommended....you almost don't need the written instructions except to identify the parts.

Motherboard Size: Mini-DTX, Mini-ITX | CPU Cooler Clearance: 85mm ATX, 172mm SFX | GPU Clearance: 275mm | Fan Mounts: 1 x 120 mm front; 1 x 120mm rear | PSU Clearance: 140mm | Front I/O: 2 x USB 3.0, Headphone, Microphone, Power Button | Size: 7.87" x 9.13" x 11.02" | Weight: 7.28 pounds This is a great case for the builder who demands the best, but wants a simple straightforward build with the least amount of guesswork. Two of the biggest pains of building in a small form factor case is the cooling and cable management, and with this case, it's done for you. The included 280mm water cooler which is cable of handling a high performance CPU (my i7 is no problem) and a large enough case and power supply to handle very large GPUs, even a RTX 3090. The included 850W power supply means you won't run out of headroom even when the RTX4xxx series comes out. Considering how small these PC cases can be, you should also get a handle on cable management. When you’re working with so little space, the less clutter you have means you can more freely work your other components in and ultimately ensure good airflow when the system is up and running. Motherboard Size: ITX, Micro ATX, ATX, E-ATX | CPU Cooler Clearance: 164mm-172mm | GPU Clearance: 365mm | Fan Mounts: 1 x 120/140mm front; 2 x 120/140mm top; 1 x 120mm rear; 2 x 120/140mm bottom; 2 x 120/140mm left side | PSU Clearance: 332mm | Front I/O: 2 x USB 3.2 Gen 1 Type A, 1 x USB 3.2 Gen 2 x 2 Type C, Headphone, Microphone, Power Button, Reset Button | Size: 9.1" x 15.9" x 16.3" Full-size GPU Compatible: Triple slot GPUs are supported with a maximum length of 330mm and maximum width of 156mm. Vertical mounting is optional.Custom Cooling Support: Two liquid cooling pump locations alongside side and bottom radiator mounting locations allow for powerful, custom water-cooled builds inside a compact enclosure As for M.2 vs SATA, I don't even see a reason to buy 2.5" drives because M.2 NVMe SSDs are currently so close in price. You will greatly eliminate unnecessary wiring by going with M.2 NVMe for storage. With this case, every panel comes off so remove the side, bottom panels. You can even undo the top but that's not necessary. Screw down the motherboard into the case, attach the two power cables to motherboard, and 3 cables for the headers (front panel, audio, USB). The CPU power cable is already neatly pre-routed into the top corner.

In case anyone's thinking "this guy's an idiot - why would he expect his old pc components to fit in an mini-ITX case???" - well, this idiot's previous set up was also a mini-ITX - it was just a different shape (more of a cube) so bigger things fit. Thankfully - my RTX 3060 fit just fine...except I can't put any fans underneath it on the bottom of the case, but that's fine, I have enough fans for now. But if you want a high performance small-ish computer without a lot of work, this is the way to go.Single slot water-cooler GPUs or vertically mounted GPUs are recommended when using bottom radiator position Gainward GeForce RTX 4090 Phantom / Gainward GeForce RTX 4090 Phantom "GS" (default adapter doesn't quite fit)