The biggest difference between these two rifle scopes, is in the optical properties. This difference is really big, since 6 of 7 of our testers would rather buy the Nightforce than the Vortex. But we have to consider that the price difference is also very big, and the question is if the better picture in the Nightforce, is worth the additional 1700 euros.

The parallax adjustment on both rifle scopes is on the left side of the rifle scope (when looking from the eyepiece), and again, both are very similar. The parallax turrets are nice and smooth, and it is easy to adjust the parallax to the correct setting. On the Vortex, the parallax goes from 20 meters to infinity, and on the Nightforce from 25 meters to infinity. For both rifle scopes we tested, many additional accessories are available, such as sunshades, flip up covers, cleaning kits and more. The biggest difference between these two precision rifle scopes is in the price. Now we finally see why the big differences in the optical properties, since the price difference is extremely high. For the price of one Nightforce, you almost get 2 Vortex scopes, with all other functions similar to the Nightforce, except the optical clarity.

March Benchrest 50x52 Specifications

Like previously mentioned, the minimal magnification on both rifle scopes is with 15x times the same. The maximal magnification on the Vortex is 60x and on the Nightforce 55x. The field of view is also very equal, the differences are just in centimeters, but this mostly isn’t very important on a target scope. A noticeable difference between these two scopes is in the eye relief, which is much bigger on the Vortex. This is a handy feature, especially when shooting strong recoiling caliber weapons. In our optical test, we have a clear winner. From a total of 91 points, the Nightforce scored 69, what is 47 points more than the Vortex. In all categories, except one, did Nightforce get more points than the Vortex. The only category where Vortex scored was the subjective impression of the field of view, and this only at the 55x magnification, with only 1 point more then Nightforce. Both companies are based in the USA, but both rifle scopes are made in Japan. The difference in these two companies is that Vortex produces all their optics in Asian companies, Nightforce on the other hand, makes their products only in Japan, or in their own facility in the USA. Nightforce is already well known in the sport shooting community because of its successful predecessors, but now they have a new competitor, Vortex. Vortex is also a very known optics manufacturer, but with the Golden Eagle, it is their first trie to succeed in the F-class competitions and other target shooting sports. Size and weight:

Definition: A centimeter (symbol: cm) is a unit of length in the International System of Units (SI), the current form of the metric system. It is defined as 1/100 meters. Because both turrets have 10 MOA of adjustment per turn, are both of them multi-turn turrets, with only a visual turn indicator under the turret. The entire elevation range is 55 MOA or 16 MIL, so for shooting on longer ranges, we would recommend a canted base or mount. The eye-box on both magnifications is also better on the Nightforce, especially on the bigger magnification you have to be very centered to have a clear picture on the Vortex. Frameless Balustrade Residential Channels Commercial Channels Channel Accessories Stiffeners Pre-Assembled Posts Round Pre-Assembled Posts Square Pre-Assembled Posts Slotted Pre-Assembled Posts More Pre-Assembled Posts For the length it is not worth to mention, because when we adjusted the diopter to our eyes, we hade both – once was the Vortex longer and once the Nightforce. But every time the difference was maximal 2 millimeters.

March Benchrest 50x52 Details

An inch is the name of a unit of length in a number of different systems, including Imperial units, and United States customary units. There are 36 inches in a yard and 12 inches in a foot. The inch is usually the universal unit of measurement in the United States, and is widely used in the United Kingdom, and Canada, despite the introduction of metric to the latter two in the 1960s and 1970s, respectively. The inch is still commonly used informally, although somewhat less, in other Commonwealth nations such as Australia; an example being the long standing tradition of measuring the height of newborn children in inches rather than centimetres. The international inch is defined to be equal to 25.4 millimeters. Safety Clothing & Equipment Head & Face Protection Body Protection Miscellaneous Safety Measuring & Layout Tools Tape Measures Marking Equipment Levels & Combination Squares Striking Tools We accurately fine tune the parallax on all the testing products for observing trees and buildings at 350 m and each person sets the diopter for their specific needs. Frameless Glass Doors Sliding Glass Doors Patch Fittings Glass Door Fittings Door Handles & Accessories More Frameless Glass Doors Definition: An inch (symbol: in) is a unit of length in the imperial and US customary systems of measurement. An inch was defined to be equivalent to exactly 25.4 millimeters in 1959. There are 12 inches in a foot and 36 inches in a yard.

The reticles we had are both very thin, with only 0.016 MOA of reticle coverage at the magnification 40x at 100 yards. In the Vortex, we had an SCR-1 Reticle, which is a simple crosshair without any other lines, just vertical and horizontal. Both rifle scopes are very similar in the construction, and both are capable of shooting on longer ranges and make small groups. On the outside, both look very similar, the small difference is in the turrets size, where the turrets of the Vortex are a little bit bigger. Everything else is not worth to mention, since this is just the personal taste. Lubricants Countersinks & Taps Spiral Flute Combi Taps Impact Taps Countersinks Tool Storage Paint & Consumables All Tools & Workwear Sheets & Plates Hot Rolled Plate Durbar Floor Plates Galvanised Sheet Base Plates High Yield Reinforcement Bar Welded Mesh Treated timber battens give a solid framework to your roof, ready for any of our range of roofing materials to be installed on top. For improved energy efficiency and more comfortable interiors all year round, remember to also install loft & roof insulation as part of your construction work or refurbishment.There have been a number of different standards for the inch in the past, with the current definition being based on the international yard. One of the earliest definitions of the inch was based on barleycorns, where an inch was equal to the length of three grains of dry, round barley placed end-to-end. Another version of the inch is also believed to have been derived from the width of a human thumb, where the length was obtained from averaging the width of three thumbs: a small, a medium, and a large one. Bo and the team tried several different solutions until they came up with one that provided the same functionality as blinds with visible cords.