The two projectors both have built-in speakers, but NexiGo PJ40 is equipped with 20Wspeakers, more powerful than the NexiGo PJ30’s 5W speaker. However, NexiGo PJ30 supports Dolby Audio, which can enhance the audio quality greatly when streaming content from Netflix and other apps. Connectivity Instead of rotating through red, green, and blue LEDs lighting up in sequence, the PJ20 uses a white LED light source, and pairs it with a 5,760-by-1,080 LCD. Red, green, and blue filters on individual cells in the LCD matrix deliver the red, green, and blue components for each pixel in the 1,920-by-1,080 image to the screen at the same time. With all three primary colors showing at once, there's no way to see the individual components of each pixel if you're far enough away to see the image as a whole. The white LED is designed to last the life of the projector, and is rated at 30,000 hours. distance between the lens of the projector and the surface of the screen. On the graphical representation of a screen in the middle of the NexiGo PJ40 is the latest projector so far from NexiGo Company. Its specifications and features are very good for the price, such as native 1080P resolution, 600ANSI brightness, auto vertical keystone, and zoom correction, up to 300 inches screen. The place to search for projectors, ask for Buying Help or Setup Help, News about upcoming releases, and technological advancements.

NexiGo PJ40 Movie Projector, 700 ANSI Lumens, Native 1080P

Through the side-by-side specs comparison below, we can find that NexiGo PJ40 is more expensive but it is much brighter and has better overall performance. Specs

Regarding ports, the projector is equipped with 2 HDMI (HDMI 2.0 and CEC supported), 2 USB, AV, RJ45, and a 3.5mm audio port. With HDMI interfaces, the projector can be connected to various external devices. At the smaller size, I still saw a slight tendency for some bright scenes with light colors to look a touch overexposed. But most colors were nicely saturated, contrast was much improved, bright scenes looked much more three-dimensional, and as already mentioned, the smaller size and higher contrast also delivered a crisper image. Hues at both sizes were off target, but no more so than typical for projectors in this class. And very much on the plus side, I didn't see any obvious color bias. However, the PJ20 did not handle shadow detail well. Even when using the smaller screen size, I couldn't make out what was happening in the dark scenes in our test suite.

NexiGo Projectors NexiGo Projectors

away from the screen or wall, the image will get bigger, and as you push the projector closer to the screen or wall the image will be smaller. To properlyLooking for a projector for my bedroom. I don’t know whether I should choose between those two (Yaber and NexiGo) or the Epson 8350 (CAD500 used). I know the Epson has better picture quality but bulb life is pretty low (4000 hours). And to replace the bulb it will cost me about CAD300 every time. So the Epson’s bulb alone is about the same price as the Yaber and NexiGo projectors. So the cost of the Epson seems pretty high. So that’s what making me not want to go for the Epson.

NexiGo PJ40 Have The Best Speakers Among Budget Does NexiGo PJ40 Have The Best Speakers Among Budget

NexiGo PJ40 and PJ30 are both cost-efficient, but NexiGo PJ40 is better because the projector has higher brightness, 4K support, and a more powerful speaker. For audio, the PJ20 supports Dolby and Dolby Plus. Audio quality from the onboard 5-watt mono speaker was easily good enough to be usable at a high-enough volume to fill a midsize family room. If you need stereo, better quality, or higher volume, you can take advantage of the 3.5mm audio-out port or Bluetooth to connect to an external sound system.The keystone correction works well. I have to place the projector off to one side and it does a good job of projecting onto my screen. I think the picture looks really good to me as well. For my bedroom it's been awesome.

NexiGo projectors? P40 just came out : r/budgetprojectors NexiGo projectors? P40 just came out : r/budgetprojectors

in your room. The position of the projector in your room changes because you will need to move the projector closer or further away from the screen Thankfully, this is not a fad. You get a really bright and crisp projection that you could use in daylight without problems. On a very sunny day, it may feel a little dim, but as someone who lives in the UK, the constant overcast simply creates constant opportunities to use the projector throughout the day. No racism. CCC in this sub stands for Cheap but Can afford Crap, any illusion to saying CCC to disparage another community or race will result in a ban from here on out. The focus, in this case, is powered, and you adjust it through buttons on the remote, which is more convenient than using a manual focus ring or thumbwheel. However, it's hard to control precisely. I wound up getting a reasonably well-focused image after first overshooting several times, but at the 90-inch-diagonal image size I started with, it wasn't as crisp or as detailed as I expect for the resolution. All projector talk is welcome here even the cheap stuff. But like don’t post or push spammy products. Will result in a ban from here on out.

Using the Zoom Range Slider

Connectors on the rear panel include two HDMI 1.4 ports plus two USB Type-A ports, which you can use to read files from a USB memory key or to power a streaming dongle plugged into one of the HDMI ports. The projector also supports wireless connections, including DLNA and Windows Cast, and can mirror Android and iOS phones and tablets. For wired connection, the two projectors are equipped with HDMI, USB, and AV, but NexiGo PJ40 has one more RJ45 LAN port. Conclusion The PJ40 may not have the advanced features and capabilities of higher-end projectors, but it still offers great value for its price range. The PJ20's menus include three predefined color modes with no options to adjust any settings, and one User mode that lets you adjust Contrast, Brightness, Color Saturation, and Sharpness. As with too many other inexpensive projectors, having multiple picture modes is almost pointless. Opening the menus covers the entire screen, and the modes are similar enough that by the time you get to the right submenu, change the mode, and close the menu, it's impossible to tell what, if anything, has changed. For my viewing tests, I decided to trust NexiGo's default choice, and used Standard mode.