It looks to me like the only exposed screw is at the very Apex of the roof on the round cover piece and that every Dry Verge Cap lower down has the screw covered by the Dry Verge Cap above it.

Our dry verge kits are available in a number of colours, giving you the freedom to choose either a bold or subtle option for your home. We have products suited to eaves, ridges and roof verges, and each choice comes with detailed installation instructions from the manufacturer. In addition to the uPVC dry verge itself, there are two key components that make up a complete system: A Dry Verge End Caps and a Roof Verge Trim. These components are designed to provide a neat and tidy finish to the roof. They also work together to ensure that the entire system is fully weatherproof.A roof verge is the part of the roof where the tiles end, where the roof meets the gable. Traditionally, a roof verge is fixed with mortar to create a waterproof and weatherproof finish. Fix Starter Kit/PK: The next step is to fit the dry verges to the correct length. The end cap is typically made from uPVC and is designed to fit over the gable end. The length of the end cap will depend on the length of the gable end and the roof tiles, so it is important to measure carefully. A dry verge system provides all the protection of a wet verge system but with a number of benefits. In some cases, the verge units are suitable for both left and right-handed verges – if this is the case, just remove the tab to make the verge suitable for the side you are working on. If not, just ensure you have the correct verge unit for the side you are working on. Prepare the Verge End: The first step is to prepare the verge end. This involves cleaning the area and making sure it is free of any loose mortar or debris. This is important because the system will need to be securely fixed to the gable end.

Fix the batten end clips to the end of each batten. This will create a secure place on which you can fix the verge units. Step 3: At MB DIY, we provide the most durable and stylish Dry Verge System, including Dry Verge End Caps and Trims in various colours. Cut the uPVC Dry Verge: The uPVC Verge will need to be cut to the correct length and bent to the correct angle. This is to ensure that the system fits snugly over the roof tiles and gable end. The length of the verge will depend on the length of the gable end and the roof tiles, so it is important to measure carefully.

What is a dry verge system?

Fix the eaves closure unit onto the bargeboard using the screws provided. This can also be fixed to the fascia board with the L-shaped clip. Step 5: So, you are thinking about installing a metal roof and you don’t have any experience. You are concerned about installing the trim incorrectly because it will cause your roof to leak. As a DIY builder who may not read plans, a written install guide is confusing. That’s why we created a step by step written guide and a video that will make installing gable trim a breeze.

Install the underlay if required, and ensure all battens extend beyond the gable wall or bargeboard by 20-40mm – they must extend by the same distance to create a straight and even line. If the tiling battens are rotting or showing signs of wear and tear, the alternative is to fix a batten strip along the verge instead. Step 2: This blog has written instructions and pictures that illustrate each step. However, just in case you are a visual person we have also made an easy to follow video. The blog is only intended to support the video. Follow the instructions within the video for gable trim installation. We can only provide a delivery date and are not able to confirm the time delivery will be attempted. Therefore, we ask that somebody is able to accept and sign for your items throughout the started delivery date.

Flawless Dry Verge Installation

Fit the Dry Verge End Cap: Once the end cap has been cut to the correct length, it can be fitted to the gable end. The end cap is designed to fit over the gable end, and it is typically secured in place with screws. Clip the first verge unit over the eaves closure unit, then slide it along until the end lines up with the edge of the roof tile. Once this is done, nail the top of the verge unit into the batten end clip. Step 6: My roof was re-tiled last year and we had plastic Dry Verge Caps fitted. The top of the cap is screwed in to the timber batons and the lower end of the Dry Verge Cap is not secured (the bottom one is screwed onto the guttering too though). This installation article specifically covers gable or rake trim installation for an exposed fastener panel such as: R Panel/PBR Panel , Western Rib/7.2 Panel , and ⅞” Corrugated . It isn’t intended for installation of standing seam panels. Envirotile - Gable End Cap is an eco-friendly, lightweight plastic cap piece which fixes to the end of the Envirotile - Main Ridge Cap on gable roofs to give a professional finish.