Rather, it’s generally considered alongside Cat7 for performing at similar speeds and distances in most day-to-day applications and environments. Whether in a home network environment or a commercial application, this connector will meet all your needs.

If you want to connect these cables to your D-Link switch's 10GBASE-T ports, then you need to put whatever connector your D-Link switch has, and your D-Link switch almost certainly has Cat 6a 8P8C ("RJ-45") connectors, because it's been designed to work with Cat 6 and Cat 6a cabling. I have a lot of Cat 7 shielded cable and I want to make sure I am using the most advantageous connectors to get the most out of the cable since I now have a top of the line D-Link switch that supports Cat 7.Where you see Ethernet cable labelled as either Cat7(a) STP or FTP, these acronyms stand for Shielded Twisted Pair or Foiled Twisted Pair respectively, and they essentially mean the same thing. That said, whether you’re building a new network or upgrading an older one, leave Cat7 well enough alone. While it’s certainly true that very few typical home hardware setups will support anything like the sorts of data transfer speeds and bandwidths that Cat7(a) Ethernet cabling can, using the highest revision wire you can will still offer potential performance boosts in many basic router-to-device networking scenarios. In this guide, we’ll look at some of the key features and applications of Cat 7 cable, and how it builds on the previous capabilities of the preceding Cat5 and Cat6 Ethernet standards.

Let's say you live in Chattanooga, Tennessee though and you've just upgraded to the fastest residential internet service in the country at 25Gbps.I like the idea in the TERA design but would suggest it is not suitable for network sockets at skirting board level.

I considered using the TERA terminators, as described below, but I agree these look too big to be of much practical use and I am sure I will end up breaking the cables and connection points, so I gave up on this idea. I know I am dumb for getting the cable before understanding it fully, but I always thought I had quite a good grasp of logic and this makes my brain hurt. If your hardware is outdated and doesn’t have the capacity to handle the speeds delivered by Cat7 cables, the performance of your system will remain the same.Cat7 cables are also compatible with the TERA connector , although that has also seen very little use in the industry. Additionally, many people first bought into Ethernet connectivity fairly early on in the home hub era (around the Cat5 cable revision or earlier), and naturally look to the latest versions when needing to replace or upgrade older cables. Some have splines, others add additional foil or braided shielding for the overall wire, and some have both.