The best way to use a grout cleaner depends on the formula, so always consult the manufacturer’s instructions before cleaning grout. In general, though, you should start by washing the tiles with a mixture of warm water and mild dish soap. For a tile floor, sweep or vacuum, and then mop or use a grout steamer. Use a toothbrush or scrub brush to scrub the grout lines, applying firm pressure to lift away any grime. The Grout-Eez grout cleaner does use some harsher chemicals than the eco-friendly alternatives. For that reason, it may not be the best choice for food prep areas, such as kitchen countertops. (Though, that's not unusual for this product category.) You'll also want to avoid using it on natural stone (the brand is very clear about this). Rinse the area with water to remove any leftover cleaning solution. With these few simple steps, your grout will look brand-new. The formula includes bleach, so it disinfects while it cleans, too—though, the presence of bleach does require an extra level of care. You don't want to let it sit for very long, or it may damage your surface's finish (with older porcelain in particular). In addition, as with any cleaners that contain bleach, you’ll want to take the necessary precautions to ventilate the area, wear protective gloves, and keep the bleach away from your eyes and skin. It is also key to remember: nevermix the cleaner with any others, because the result can be hazardous. Last, always test the cleaner on a small area first to make sure it won’t scratch or discolor your tile.

Sometimes, this is all it needs. The warm water will loosen the dirt and it will simply wash off. This will save you a lot of time, so it is definitely worth trying. Are you tired of looking at dingy, dirty grout in your kitchen, bathroom, or other tiled areas of your home? If The Pink Stuff looks familiar, you're probably recognizing it from its well-deserved spin in the TikTok spotlight. This versatile cleaning paste has gone viral for its ease of use and impressive performance. The pink paste has some grit to it, making it effective on everything from grease and grime to pen and marker stains, but it's not so rough that it leaves scratches or damage behind. In fact, it's safe for a range of surfaces beyond just grout, including metal, ceramics, porcelain, marble, and wood (plus others).

The downside? As with some of our other gentler recommendations, after you spray it on, you can expect to do a bit more scrubbing with this formula than those with stronger cleaning agents. Fortunately, it's safe to use on porcelain, ceramic, grout, stainless steel, fiberglass, acrylic, and chrome as a result and is designed to fight any hard water stains and soap scum, too. This means you can use the same cleaner on most of your bathroom and kitchen fixtures, as well as your tile and grout (just steer clear of brass, granite, marble, and wood).

Our process for selecting our top grout cleaners involved hands-on testing, internal survey insights, and thorough research. Even if you choose a fume-free grout cleaner, open a window or turn on a fan in the room that you’re cleaning to make sure you have proper ventilation. As for the best grout cleaning solution, after researching, testing products at home, and surveying our savvy staff on their favorite cleaning supplies, we narrowed the options down to this list of top recommendations. The best grout cleaners are easy to apply, work on various stains, and get the job done with minimal effort (in other words, you won't regret your tile choices). However, make sure you follow the safety instructions. We recommend wearing rubber gloves when working with hydrogen peroxide.

Steam clean grout with a narrow nozzle hand-held attachment to get a good-looking finish (Image credit: Getty Images) 4. Cover up with a grout pen Once you’ve let the grout cleaner sit on the grout for the specified time, always rinse it away with clean water. If you don’t, the grout can sometimes reabsorb the dirt and grime trapped in the cleaner. Apply the paste liberally to the grout using an old toothbrush or a hard-bristled brush. Allow the paste to settle for about 5 to 10 minutes. Once you have mixed grout and applied to the wall or floor – assuming that all prep was done correctly and left to dry according to manufacturers instructions – grout should last anywhere between five and ten years. Begin by combining equal parts lemon juice and salt in a small bowl. The acid in the lemon juice will help to lift any dirt or stains, while the salt will act as a natural abrasive to scrub away grime.

Next, use a toothbrush to scrub the grout lines, applying firm pressure to ensure that the cleaner is able to lift away any grime. There are also some grout cleaners that are designed for specific grout colours. For example, you could use a white cleaner for white grout or a chocolate cleaner for brown grout. These formulas not only clean the grout but leave a tint of colour behind to refresh the grout’s appearance. If you opt for this type of formula, it’s extremely important to get the colour right.If your grout is severely stained, a grout cleaner may be unable to remove all the discoloration. In that case, the grout may need to be replaced. FAQ The formula is notably safe for many types of surfaces, including grout, tile, natural stone, and marble. It can also effectively remove dirt, grime, soap scum, andeven pet accidents, which is particularly great for any pet owners who are looking to spruce up their floors. However, it is not effective on calcium deposits from hard water or water spots, so if you're after a product that does double-duty, you may want to consider a different option. Your grout may be at a point that no amount of cleaning can restore it to its former glory. You’ll either have to make do with the old grout or admit defeat and and think about regrouting tiles. This will be a more time-consuming job than cleaning, but you will get nice new clean grout to look at and enjoy. A. Some grout cleaners will strip away any sealant product that you’ve applied on top of the grout. If you want to preserve your sealant, opt for a gentle formula that’s acid-free and has a neutral pH.

Yes and no. If your grout is old and lifting because moisture has gone behind parts of the tiles it is not worth putting new grout over the old. If your grout is still in reasonable condition you can apply new grout but you will only be able to add a thin layer and it will only be a temporary measure especially in areas exposed to a lot of water i.e. a shower.The list of ingredients is short and simple, too: just quartz, soap, sodium silicate, dye, and fragrance. The dye and fragrance may not appeal to everyone , but if they're not a deal-breaker for you, we think you'll be just as pleased as we were with The Pink Stuff. When you’re cleaning grout, it’s inevitable that some of the grout cleaner will get on the surrounding surfaces. That’s why it’s important to make sure that the formula you choose is safe for the surfaces in your home. Next, add a spoonful of bicarbonate of soda to the mixture and stir to combine. The bicarbonate of soda will help to further scrub away dirt and stains, and it will also help to deodorize the area.