CLI: Access the Command Line Interface. You can do this using the CLI button in the Web UI or by using a program such as PuTTY. VLAN It is becoming more common forISPs toprovide FTTH (Fiber to the Home) and require that the Internet be distributed using a VLAN to separate Internet from IPTV and Voice services. Use this option to tag the Internet connection with a VLAN ID. The CLOUD act has just legalized the following violations of the constitutional right to due process: Other than the usual bog-standard router features there is also traffic analysis, QOS and the ability to host different VPN servers on the device.

Allocating memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x1100000), size 0x199ccc0 Kernel command line: root=/dev/mmcblk0p2 rootdelay=10 rw rootsqimg=squashfs.img rootsqwdir=w mtdparts=spi32766.0:3072k(boot0),1024k(dummy),64k(eeprom) root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait console=ttyS0,115200 EDAC DEVICE0: Giving out device to module octeon-cpu controller cache: DEV octeon_pc_edac (INTERRUPT)

Table of Contents

The EdgeOS Configuration Interface will appear, allowing you to customize your settings as needed. For more information, refer to the EdgeOS User Guide, which is available at

For example, ubnt upgrades Linux kernel in ER-X to align with the higher end models recently. Also pushed MediaTek to release a SDK with 4.x kernel. So by firmware v2 timeframe, all EdgeRouters will be upgraded and aligned on Linux 4.x. Such as these actions are essential upgrades over a product's multiyear lifetime.Offloading is used to execute functions of the router using the hardware directly, instead of a process of software functions. The benefit of offloading in EdgeOS is increased performance and throughput by notdepending on the CPU for forwarding decisions.

NOTE: *Offloading support for Bonding on Cavium devices is available starting from the v2.0.0 EdgeOS firmware release. NOTE:It is recommended to configure the ISP supplied modem/router in bridge mode. This setting will forward the public IP from the ISP modem/router to the EdgeRouter. The next step is to configure the L2TP VPN settings on the client(s). Make sure to match the credentials on the client and server (EdgeRouter). Windows L2TP VPN Client

IPsec Offloading Support

Other differences between the routers are the amount of interfaces (including SFP/SFP+ slots) and the available resources. The ER-4 for example, has a 4-core 1GHz CPU with 1GB of available RAM, whereas the ER-X has a 2-core 880 MHz CPU with 256MB of available RAM. A Zone-Based Firewall assigns each interface to a specific zone. The firewall zones will be used to define what traffic is allowed to flow between the interfaces. The traffic that originates in the EdgeRouter itself will also be assigned to a zone: the local zone.