Clearwater Foam Remover is designed to control and prevent foaming in your hot tub, which is typically caused by the reaction of water with shampoos, deodorants and natural body oils present on the user.

In the event of spillage, clean up using clean receptacles and dispose of carefully. Do not add water to spilled materials. Do not use floor sweeping compounds to clean up spills. Sweep and scoop spilled material into clean, dedicated equipment. You can find a list of the high quality algaecides for pools in our another article (different types of algae included). What is an algaecide and how does it work? For low pH levels below 7.2 you will need to use pH Plus to help raise the pH levels and balance the water.Easy To Use: by simply pouring the recommended dose (stated clearly on the bottle) whilst the pump is turned on for efficient distribution They are added once at the beginning of the swimming season, they usually contain copper and are often safe to swim immediately after treatment. However, if you add a large dose of this algaecide and go swimming right away, your hair may turn green or blue, or it may irritate your eyes and skin. 💧 Regular algaecides When you’re ready to begin mixing your chemicals, you should handle them with chemical resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. It is also advised to wear tightly sealed goggles and appropriate protective clothing such as long sleeves, trousers, and closed-toed shoes that fully protect your feet from spills. You should also wash your hands after handling chemicals. The anti-algae swimming pool prevents the formation of algae on the walls and bottom of the swimming pool.

Finally, look at the Chlorine and aim for a reading of 3‑5ppm. Total Alkalinity and pH work hand‑in‑hand and if these two are not balanced the sanitizer (chlorine) will not work properly. These multi-function chlorine tablets are an easy and convenient way of keeping hot tub and pool water clean. As well as containing chlorine, which kills bacteria and other organisms by disinfecting water, the tablets also contain an algaecide solution that prevents the growth of algae. The chlorine tablets also contain a water clarifier. Some debris and particles that find their way into water, such as dead skin and algae, are too small to be trapped by the filter system. Clarifier contains flocculants, which bind particles together so that a filter can trap them, producing clean and sparkly water. Clearwater® 5 kg Multifunction Chlorine Tablets an easy way to make sure that your pool or hot tub stays clear and hygienic Please note: The table is only applicable to Clearwater® Chemicals. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on the exact amount of water in your hot tub, water type, water temperature, positioning of hot tub etc. Therefore it is essential to test the water every time before you use it. Total Alkalinity (TA) is the measure of your hot tub water’s ability to neutralise acids. Balanced Total Alkalinity helps control the pH levels and the correct level to aim for is between 80 and 120 parts per million (ppm).

Be in the know

It is important to get your hot tub Chlorine levels correct. Not enough Chlorine can result in unhygienic bathing conditions, whereas high Chlorine levels can cause irritated eyes or skin. Effectively Treats Cloudy Or Dull Looking Water: Which can be caused by dead algae, skin cells, dirt and grime pH levels indicate how acidic or basic the pool water is. Low levels are acidic, while high levels are basic. The ideal level range for the pool is from 7.4 to 7.6.