AUTOMOTIVE: suspension – chassis – doors – trunk areas – engine & fuel tanks – rusty frames – floor pans – corroded battery tray. Cleaner Degreaser - is ideal as the first step to renovating corroded metal as it removes all traces of dirt, grease wax and other contaminants which leaves the surface ready for painting or rust treatment. It can also be diluted in hot water to effectively clean out the inside of petrol or oil tanks. Although highly effective on metal components, POR15 cleaner degreaser can also be used to clean vinyl, canvas and nylon. See the How Do I Stop Rust Permanently with POR-15 Solutions? article in the Technical Articles section In 2016, the wood flooring side of the business was sold, along with the Absolute Coatings brand name. The company was renamed Paint Over Rust Products, LLC (P.O.R. Products) to reflect its focus on specialty metal coatings for heavy industrial equipment, agricultural machines, and automotive restorations. The company continues to adapt to changing markets and recently launched its Auto Refinish division, focusing on clear coats and primers for the automotive refinish market.

The POR15 Rust Preventive Paint can be applied over rusty or seasoned metal surfaces to stop rust from reoccurring by preventing any exposure to moisture. For better, longer lasting results we recommend the surface is firstly cleaned with POR15 cleaner degreaser then treated with POR15 metal prep.POR-15® high-performance coatings revolutionised rust protection. POR-15 products form an impenetrable barrier that protects a variety of surfaces from water, chemicals, salt, corrosive contaminants, and everyday wear and tear. POR-15® products are designed to work separately or as a complete system. Metal Prep - gently etches metal, creating an ideal anchor pattern for coatings such as POR-15 Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. POR-15 Metal Prep is not caustic, corrosive, toxic or flammable.

Founded in 1923 as Wood Finishing Products Co, the company produced shellac coatings and related products under the Absolute brand name, catering to a large market for shellac that existed before the introduction of alkyd paints. The company focused on using shellac, lacquer, varnishes, and polyurethanes for floor finishes for almost 95 years, and its founders were dedicated to producing the best products possible. The company later changed its name to Absolute Coatings to reflect the growth in its product line. This includes POR15 Rust Preventive Paint (113ml). Tin covers up to 12sq feet. Perfect if you don’t finish all in once.Whilst any paint will provide some degree of protection from rust for a while, no other is as permanent as POR-15. When others have chipped, scratched, flaked, and peeled, POR-15 Rust Preventative Paint will still be preventing rust.

POR-15 Metal Prep provides the best adhesion for on any metal surface, including aluminum and shiny polished metal surfaces. The simple process of this pre-paint cleaner for metal gently etches metal, creating an ideal anchor pattern for coatings such as POR-15 Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This metal etching solution will allow better adhesion of POR-15 Rust Preventive Coating or any other coating. This metal-etching rust neutralizer is not caustic, corrosive, toxic or flammable. I have had the same poor results with poo15. I had a brochure from a car show that makes this stuff look like the ultimate do-all end-all frame paint. So, when I restored my frame, that is what I bought. Best analogy I can think of is putting a waterproof, impermeable bandage over an infected cut. Looks good from the outside but who knows what's going on underneath.POR15 Rust preventive paint is UV light sensitive so a top coat must be applied if exposed to prolonged periods of sunlight. It’s so tough it actually adds strength to weakened metal. And it won’t absorb moisture and swell like conventional body fillers. Try it yourself, it’s incredible! POR-15 Rust Preventive Coating is a high-performance coating designed to paint directly on prepped rusted or seasoned metal surfaces to stop rust permanently. POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust. x 946ml Cleaner degreaser, 1 x 946ml Metal prep, 1x 473ml Petrol tank sealer that will seal up to 9 US Gallon tank / 7 1/2 UK Gallon (34L) To prevent the corrosion process, we thoroughly recommend applying the POR-15 Top Coat over POR-15 Rust Preventive

and if not protected will wear off in a few years time if you do not coat it with a Top Coat Paint. Clean with Cleaner Degreaser as above, then sand with 300 grit sandpaper and apply one light to medium coat of POR-15 Self-Etching Primer. Spray or Brush Application: POR-15 Topcoat will need thinning using POR15 Solvent for all spray and brush applications between 10-20%. Use 25-35 lbs.(172-240Kpa) pressure for normal semi-gloss. The quart (946ml)of POR15 top coat will coat approximately 100 sq. ft. with a single coat. The pint (473ml) will coat approximately 50 sq. ft. with a single coat.When used together, they provide a coating that not only stops rust but prevents it from returning. Known for the unbeatable 3-step stop rust system, POR-15® is committed to innovation, quality control, and excellent customer service. The company attributes much of its success to the personal relationships it has built with its customers over the years, valuing their trust and loyalty. Private label business has also been important to POR Products, which has earned the trust of some of the largest paint companies in the country. Allow to cure for 30 Minutes at 68ºF (20ºC), or longer in cooler temperatures. Apply POR15 Top Coat as final finish. Depending on temperatures and humidity recoat at 3-12 hour intervals. In the 1990s, the company moved to a larger facility in New Rochelle, NY, with +/- 50,000 sq. ft. of manufacturing and office space on two acres of land. It became the producer of POR-15, a specialty paint designed to protect rusted metal surfaces, marketed to automotive customers as a restoration and corrosion prevention coating. POR-15 has grown to become a leader in the restoration market.