We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items USAGE GUIDE: A minimum of two coats is required, subsequent coats must be applied on the same day no longer than 8 hours apart. If that'snot possible then lightly sand down the surface before overcoating to ensure adhesion.

Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with water. Do not store or use in extremes of temperature and protect from frost. Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. Faster Delivery Cuprinol Garden Shades 1L has been specially developed to colour and protect sheds, fences and other garden wood. Its special pigments ensure a rich colour and allow the natural texture of the wood grain to shine through. We recommend obtaining a sample to ensure you're happy with the colour before purchasing your paint as colours can vary on screens. We offer the full range of colours, these shades are premixed. We also offer a wider range of Custom Mixed shades. Colours may also vary depending on surface to be treated, always test a small area to ensure you are happy with the colour. We deliver to most Home Hardware Stores. Please view our store locator to find your local Home Hardware store.Untreated wood: should be pre-treated prior to adhesion test with an appropriate wood preserver to prevent rot and decay. Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay. Stir thoroughly before pouring contents into a Cuprinol sprayer. Overspraying surrounding areas can be minimized by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.

Test a small area first for colour and adhesion: Colour the final colour will depend upon the type of surface, previous treatment and number of coats applied. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can. Adhesion: if adhesion is inadequate on previously coated surfaces, lightly sand before application. Be mindful that it is waxed-enriched and that once these waxes are dried, they act to repel liquids, which would include an additional coats. Don't try to coat the whole project with one coat before getting onto the next coat. Instead it is better to paint sections in in time chunks of 2-4 hours. Please note some larger products are delivered to kerb-side (the street outside your home), it is at the drivers discretion if they can deliver the item to another location on the property. Try a test area first to ensure that colour and adhesion are acceptable. Colour testers are available to assist in your colour choice. Please note that the colour in the can may be different to the final shade when dry.

1 Litre Colour

COLOUR: The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay. A favourite with our Next Day Paint customers so far has been Muted Clay by Cuprinol Garden Shades. This is such a versatile colour, great for painting sheds, summer houses, garden furniture and fences alike. MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION. CLEAN: Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with water. Do not store or use in extremes of temperature and protect from frost.