BL Motor without carbon brushes: no maintenance and low energy consumption, therefore longer battery life c) If there were no goods supplied 30 days after the day on which we are informed about your decision to cancel this contract Makita DLX2221ST 18v Brushless Twin Kit DHP483 Combi + DTD155 Impact Driver Inc 2x 5.0Ah Batteries, 1x DC18SD Charger and 1x Carry Case

The Makita DTD155 is a cordless, Brushless Impact Driver powered by 18v Li-ion battery and has been developed as an 18 volt version of the TD111D. It features Makita's new impact mode, "A-Mode" aka "Assist Mode" which helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening. Brushless motor for more power and longer runtimes - no brushes to replace therefore easier to maintain Featuring an improved impact mode (A-mode): helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening. Brushless motor, electronic 2-speed impact power selection, one-touch bit installation. The Makita DLX2221ST is a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring electronic 2-speed impact power selection. The impact driver has been developed as an 18 volt version of the CXT TD111D. This 2-piece kit comes with 2x 5.0Ah Batteries, DC18SD Charger and a Carry Case. The Makita DTD155 is an 18v brushless impact driver with a difference featuring a 1/4in hex. Featuring Assist Mode which helps to eliminate screw cam-out and cross threading by driving at low speed until the start of tightening. These two mighty tools also come with two 5.0Ah batteries, a charger and carry case to complete your tool set. Features and Benefits: DHP483 Combi Drill

Makita HR2630/2 SDS+ 800W Hammer Drill

This saw is supplied to allow the cutting of strip wood and structural timbers. Only non-panel products that conform to the following can be cut using this saw: x tic-tac tub containing 25 x 25mm PZ2 bits and 36 x 25mm screwdriver bits (6 x Torx (T10, T15, T20, T25, T30 and T40) Well balanced, and full of features, this combi drill is incredibly versatile. With 2 mechanical gears, electric brake, and dual-rotation modes, this drill delivers up to 1700rpm no load speed, and up to 25,500bpm. Model DHP483 is a Cordless Hammer Driver Drill powered by 18V Li-ion battery. Featuring the Makita Brushless motor, precision engineered to be up to 50% more efficient than a comparative model. Without brushes in place to apply friction a Brushless motor can produce a greater measure of torque per weight. With more torque at your disposal less power is required for day to day use, adding to the motors efficiency and extending the products overall lifetime as maintenance becomes less of an issue.

The impact driver has a max 3000rpm no load speed providing up to 3900ipm, the percussive action saving time and effort, driving screws up to 30% faster than a conventional drill/driver, no pilot hole is needed even into hardwood. NEW impact mode (A-mode)helps eliminate 'screw cam out' and 'cross threading' by driving at low speed until the start of tightening Been using Makita products as a DIYer and has never let me down. Recently my trusted combi kit was borrowed and not returned! So, it was an easy choice of buying a new kit as the price is reasonable with excellent service from ITS. The cross cut saw can only make square cuts. Other agencies, mitres, grooves or points cannot be cut. The DLX2131MJ2 (DLX2131) twin kit from Makita contains the DHP482 Combi Drill and the DTD152 Impact. This version comes with 2x 5.0Ah BL1850B lithium-ion batteries. The DHP482 is a compact and precise power tool for the professional or DIY enthusiast and the DTD152 is a cordless impact driver developed for applications such as the tightening of self-drilling screws or light duty machine screws. The DLX2131TJ comes supplied in a Makpac type 3 connector case with plastic inlay.The Makita DTD155 18V LXT Brushless Impact Driver is a compact, slim bodied driver that delivers exceptional power.

The Makita DHP483 has been developed for light duty tasks, with compact body and great endurance thanks to its brushless motor. At only 176mm long and 1.6 Kg with a 3Ah+ battery attached, this drill can be used above your head or in tight spaces with minimal fatigue. MAKITA DLX2221ST 18V BRUSHLESS TWIN KIT DHP483 COMBI + DTD155 IMPACT DRIVER INC 2X 5.0AH BATTS & DC18SD CHARGER IN A CARRY CASE The cancellation period will expire after 30 days from the day on which you receive the goods, or a third party (other than the carrier) indicated by you receives the goods.The Makita DLX2221ST is a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring electronic 2-speed impact power selection. The impact driver has been developed as an 18 volt version of the CXT TD111D. This 2-piece kit comes with 2x 5.0Ah Batteries, DC18SD Charger and a Carry Case. MAKITA DHP483ZJ 18V LXT BRUSHLESS 2-SPEED COMBI DRILL Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions This great set includes the DHP483 Brushless Hammer Drill Driver with impressive specification plus the DTD155 Brushless Impact Driver ideal for repetitive screwdriving. LED job light with pre-glow and afterglow functions illuminates the work area for improved visibility

Electronic brake, a conveniently located push button for forward and reverse, and an LED job light with pre glow for use in low visibility applications. Electronic two-speed impact power selection and v ariable speed control by trigger- adjust the speed to suit the application and materialAssist Mode: helps to eliminate screw cam-out and cross threading by driving at low speed until the start of tightening