It is moisture regulating and provides an adhesive surface for subsequent treatment with finishing paints or stains (top coat). Always do a test area before starting any project and follow the manufacturer's instructions on the tin at all times. Only apply in temperatures of between 10°C and 30°C. Shake or stir well prior to and during application to ensure a consistent colour.

P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions.P273 Avoid release to the environment.P391 Collect spillage.P501 Dispose of contents/container to … Our main complaint is that there’s no clear version, so you have to choose a colour – and the waterproof finish is difficult to paint over if you don’t like the shade. The six colours are lovely, though, and include Forest Oak, Autumn Gold and Silver Copse. So, you can potentially use it on your old shed, but you should prepare the wood first. Otherwise you’re wasting your time and money.

Buy Online

used and allow 24 hours or more for timbers to fully dry before further treatment. Timber to be treated should be reasonably dry before treatment although the product will penetrate into damp timbers. Do not apply if rain is forecast in the next 48 Whatever colour or non-colour you go for, at least you won’t have to put up with the fluorescent yellowy green colour of creosote, which used to be the only wood preserver you could get. Thankfully creosote – noxious, toxic and highly flammable – is no longer sold to the general public. Are wood preservers all solvent-based? I’m worried about fumes indoors. Apply by brush onto timber at a rate of 5 m2 per litre. Apply in 2 – 3 coats depending on the porosity of the wood species. Do not apply if rain is forecast in the next 48 hours to allow time for Roxil Wood Preserver to dry and the application of a top coat.

Wood preserver is designed to be applied on freshly sawn or sanded wood. You’ll get the best out of it if you sand down whatever wood you use it on, or at least pressure-wash and scrub it. If required, new bare timber can be cleaned and de-greased with white spirit prior to application of wood preserver

If protecting the natural colour of the wood is important, use the clear preservative then overcoat with Osmo UV Protection Oil Extra or Fiddes Exterior High Build Wood Oil. Solvent-based wood preservers such as Barrettine Premier and Ronseal Total tend to absorb more deeply into wood, and decorators say they have longer-lasting effects. However they’re more smelly than water-based stuff, and tend to be less safe for the environment. That said, the most eco-friendly preserver in our line-up, Osmo Wood Protector, is solvent-based but uses safe organic ingredients, which makes it perfect for kitchen worktops. Can I use wood preserver to liven up my old shed?

Freshly cut sawn ends should be thoroughly treated with either Barrettine Premier Wood Preserver, or alternatively Barrettine End Grain Preserver H410 Very toxic to aquatic life with long lasting effects.EUH 208 Contains. May produce an allergic reaction.The best wood preserver you can buy in 2023 1. Barrettine Premier Wood Preserver (clear): Best wood preserver for all outdoor jobs

Ensure that wooden surfaces to be treated with Barrettine Wood Preserver are clean, dry and free from surface dirt, debris and other surface contaminates. New Bare Wood Wood preserver is basically an undercoat. You brush or spray it onto raw, freshly sawn or sanded wood surfaces to stabilise the wood’s moisture content and protect it from rot and decay.How to choose the best wood preserver for you What’s the difference between wood preserver and varnish? One of our top wood preservers, Sikagard Wood Preserver, can be applied on damp or rotten wood and will get to work immediately. If your shed has seen better days, Sikagard is therefore your best choice. You’ll still need to remove as much surface grime as possible, though. Clear, Odourless formula – Increases the lifetime of timber by preventing wood destroying, wood discolouring fungi and woodworm. Wood that has been oiled in the last year should be allowed to weather for at least one year or until the wood preservative is able to penetrate through to the timber